Bedienungsanleitung Philips MCD370 (Seite 22 von 25) (Englisch)

67103

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

English

Volume control

Adjust VOLUME button (or press VOL +/-) to

increase or decrease the volume level.

➜ “VOL XX” is displayed. “XX”denotes the volume level.

To listen through the headphones

● Connect the headphones plug to the PHONES socket at

the front of the player.

➜ The speakers will be muted.

To switch off the volume temporarily

● Press MUTE on the remote.

➜ Playback will continue without sound and "MUTE" is

displayed.

● To restore the volume, press MUTE again.

Selecting surround sound

IMPORTANT!

This DVD micro system can only produce 2.1

channel surround sound.

● Press SURROUND on the remote to select surround or

stereo mode.

➜ The availability of the various surround sound modes

(Dolby Digital Surround, DTS Surround, Virtual Surround

Sound) depends on the number of speakers used and the

incoming sound information available on the disc.

Selecting the digital sound

effect

The digital sound effects allow you to select from various

pre-set modes that control the frequency bands of sound

to optimise certain musical styles. It greatly enhances the

excitement and enjoyment of your favourite music.

● Press SOUND on the remote repeatedly to select the

available sound effect.

When playing a DVD/VCD/SVCD, select :

– CONCERT, DRAMA, ACTION or SCI-FI

When playing a CD/MP3 or in Tuner or Aux mode,

select :

– CLASSIC, JAZZ, ROCK or DIGITAL

Dimming the display screen

● Press DIM repeatedly to select different levels of

brightness for the display screen : HIGH, MID or LOW.

Adjusting Bass/Treble level

The BASS (low tone) and TREBLE (high tone) features

enable you to define the sound-processor settings.

1 Press BASS or TREBLE.

2 Within five seconds, use the VOLUME control to adjust

the Bass or Treble level.

➜ If the volume control is not used within five seconds, it

will resume its normal volume control function.

➜ If headphone is connected, it will disable the bass/treble

controls.

Using the remote to operate

your Philips television

1 Press AV on the remote.

2 Press S or T or use the numeric keypad (0-9) to

select the TV’s channel.

3 Press TV VOL +/- to adjust the TV’s volume level.

4 Press y to turn off your TV.

Sleep timer setting

The sleep timer enables the system to switch to standby

mode automatically at a preset time.

1 Press SLEEP on the remote repeatedly to select a preset

time.

➜ The selections are as follows (time in minutes):

15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120™ OFF ™ 15...

SLEEP

2 When you reach the desired length of time, stop pressing

the SLEEP button.

➜ “SLEEP” icon appears.

To check the remaining length of time after sleep

timer is activated

● Press SLEEP once.

To change the preset sleep timer

● Press SLEEP again while the remaining sleep timer is

shown.

➜ The display will show the next sleep timer options.

To deactivate the sleep timer

● Press SLEEP repeatedly until "OFF" is displayed, or press

the STANDBY ON

y button.

Other Functions

BASIC FUNCTIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips MCD370 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips MCD370

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info