Bedienungsanleitung Philips MCD395 (Seite 23 von 41) (Englisch)

63069

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

English

IMPORTANT!

– This system is designed for regular

discs. Therefore, do not use any

accessories such as disc stabiliser rings or

disc treatment sheets, etc., as offered on

the market, because they may jam the

disc mechanism.

– Do not move the system during

playback. Doing so may damage the

system.

–DVD discs and players are designed

with regional restrictions. Before playing

a disc, make sure the disc matches the

regional code of your player.

– According to the format requirement

of DVD or VCD, some operations may be

different or restricted.

– Do not push on the disc tray or put

any objects other than disc on the disc

tray. Doing so may cause the disc player

malfunction.

– If “INVALID KEY” appears on the TV

screen when a button is pressed, it

means the function is not available on

the current disc at the current time.

Playing discs

1 Connect the power cords of the system and TV

(or any optional stereo or AV receiver) to a

power outlet.

2 Tu rn on the TV power and set to the correct

Video In channel. (See "Setting up the TV".)

3 Press ECO POWER/STANDBY-ON 2 on

the DVD Player front panel.

➜ You should see the blue Philips DVD

background screen on the TV.

4 Press OPEN/CLOSE 0 to open the disc

door and load in a disc, then press the same

button again to close the disc door.

➜ Make sure the label side is facing up.

5 Playback will start automatically (depending on

the disc type).

➜ If a disc menu appears on the TV, see "Using

the Disc Menu".

➜ If the disc is locked by parental control, you

must enter your four-digit password. (See

"SYSTEM SETUP-PASSWORD".)

6 At any time, simply press 9 to stop playback.

Disc Operations

Using the disc menu

For disc with Table Of Contents, a menu may

appear on the TV screen once you load the disc.

To select a playback feature or item

● Use 22/33/5/4 and OK or Numeric

Keypad (0-9) on the remote.

➜ Playback will start automatically.

To access or exit the menu

● Press DISC MENU on the remote.

For VCD with Playback Control (PBC)

feature (version 2.0 only)

PBC playback allows you to play Video CDs

interactively, following the menu on the display.

● During playback, press DISC MENU.

➜ If PBC was ON, it will switch to OFF and

continue playback.

➜ If PBC was OFF, it will switch to ON and

return to menu screen.

Basic playback controls

Pausing playback (DVD/VCD/CD/MP3

/WMA)

1 During playback, press 2;.

➜ Playback will pause and sound will be muted.

2 Press 2; again to resume.

Selecting a track/chapter/title (DVD/

VCD/CD/MP3/WMA)

1 Press PRESETí/ë during playback to go to

the previous or next chapter/title/track.

2 To go directly to any chapter/ title/track, enter

the chapter/ title/track number using the

Numeric Keypad (0-9).

Resuming playback from the last

stopped point (DVD/VCD/CD/MP3

/WMA)

● In stop mode and when a disc has not been

removed, press 2;.

To cancel resume mode

● In stop mode, press 9 again.

pg001-pg041_MCD395-58-Eng 4/6/10, 11:0023

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips MCD395 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips MCD395

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info