Bedienungsanleitung Philips mcm 108 b (Seite 5 von 10) (Englisch)

159966

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

* TIMER

– activates/deactivates or sets the timer function.

( ALBUM 4 3

for MP3 disc......................selects an album.

) DBB

– (Dynamic Bass Boost) enhances the bass.

¡ DSC

– (Digital Sound Control) selects sound

characteristics: JAZZ/POP/CLASSIC/ROCK.

English Controls

Controls on the system and

remote control

1 BAND

–for Tuner (on the set only) selects waveband.

2 SOURCE (CD/ TUNER/ AUX)

– switches on the system.

– selects the respective sound source for CD/

FM/ AM/ AUX.

3 STANDBY-ON / y

– switches the system to standby/on.

4 PROG/CLOCK

for CD ................. programs tracks and reviews the

program.

for clock .............. sets the clock function.

5 OPEN•CLOSE

– opens/closes the CD door.

6 VOLUME

–

– adjusts volume level.

7 TUNING 0

– tunes to radio stations.

8 iR SENSOR

– infrared sensor for remote control.

9 n

– connect headphones.

0 ÉÅ

for CD ................. starts or pauses CD playback.

! ¡1 / 2™

– skips to the beginning of a current track/

previous/ next track.

– fast searches back and forward within a track/

CD.

@ STOP 9

– stops CD playback or erase a CD program.

# AUX IN

– connects to external audio source.

$ MUTE

– switches playback sound off and on.

% REPEAT

– repeats a track /disc/ all programmed tracks.

^ SHUFF (SHUFFLE)

– plays CD/MP3 tracks in random order.

& SLEEP

– activates/deactivates or selects the sleeper time.

Notes for remote control:

– First select the source you wish to

control by pressing one of the source select

keys on the remote control (for example

CD , TUNER).

– Then select the desired function (for

example

VOLUME

ALBUM

DBB DSC

MUTE

SLEEP TIMER

REPEAT

SHUFF

AUX PROG

TUNER

3 $

(

)

General Information

This set complies with the FCC rules,

Part 15 and with 21 CFR 1040.10.

Operation is subject to the following two

conditions:

– This device may not cause harmful

interference, and

– This device must accept any

interference received, including

interference that may cause undesired

operation.

Supplied accessories

–2 speaker boxes

– remote control with battery

– AM loop antenna

Environmental Information

All unnecessary packaging has been omitted.

We have tried to make the packaging easy to

separate into three materials: cardboard (box),

polystyrene foam (buffer) and polyethylene

(bags, protective foam sheet).

Your system consists of materials which can be

recycled and reused if disassembled by a

specialized company. Please observe the local

regulations regarding the disposal of packaging

materials, exhausted batteries and old

equipment.

Safety Information

● Before operating the system, check that the

operating voltage indicated on the typeplate (or

the voltage indication beside the voltage

selector) of your system is identical with the

voltage of your local power supply. If not, please

consult your dealer.

● Place the system on a flat, hard and stable

surface.

● Place the system in a location with adequate

ventilation to prevent internal heat build-up in

your system. Allow at least 10 cm (4 inches)

clearance from the rear and the top of the unit

and 5 cm (2 inches) from each side.

● The ventilation should not be impeded by

covering the ventilation openings with items,

such as newspapers, table-cloths, curtains, etc.

● Do not expose the system, batteries or discs to

excessive moisture, rain, sand or heat sources

caused by heating equipment or direct sunlight.

● No naked flame sources, such as lighted candles,

should be placed on the apparatus.

● No objects filled with liquids, such as vases, shall

be placed on the apparatus.

● If the system is brought directly from a cold to a

warm location, or is placed in a very damp

room, moisture may condense on the lens of

the disc unit inside the system. Should this occur,

the CD player would not operate normally.

Leave the power on for about one hour with

no disc in the system until normal playback is

possible.

● The mechanical parts of the set contain self-

lubricating bearings and must not be oiled or

lubricated.

● When the system is switched to Standby

mode, it is still consuming some power.

To disconnect the system from the

power supply completely, remove the

AC power plug from the wall socket.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips mcm 108 b Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips mcm 108 b

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info