Bedienungsanleitung Philips MF-Jet 440 (Seite 28 von 36) (Englisch)

521768

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Hints & tips

v The display tells you if either of the car-

tridges (black or colour) is empty. When

changing a cartridge, check that you are

inserting the correct “Plug’n’Print” card.

The relevant information is on the back of

the “Plug’n’Print” card”.

Every time you open and close the

machine you will see the question

New cartridge? Press X to return

to the initial mode.

Cartridge capacity

Press M, 73 and OK. Press / to see the

current capacity of the black and the colour

cartridges.

Logs

The logs list the last 30 incoming and outgoing

transmissions made by your machine. A report

will be automatically printed after every 30 trans-

missions. However, you may request a print-out

at any time.

Press M, 52 and OK. The logs are printed.

Commands

Your device will ﬁ le all transmission commands

(including faxes ready for polling or for delayed

sending) in a list, the waiting queue.

Consulting or modifying

Documents in the waiting queue may have the

following status:

TX—transmission

DOC—in deposit

POL—polling

in progress—ongoing commands

SMS—SMS transmission

Press M, 62 and OK. Use / to select a

document from the waiting queue and conﬁ rm

with OK. Modify the parameters and conﬁ rm

with OK.

Immediate transmission

Press M, 61 and OK. Use / to select the

document in the waiting queue and conﬁ rm with

Y or OK to immediately perform the selected

fax or SMS transmission.

Cancelling a transmission

Press M, 63 and OK. Use / to select the

document in the waiting queue and conﬁ rm with

OK.

Printing a document

Press M, 64 and OK. Use / to select the

document in the waiting queue and conﬁ rm with

OK.

Print the waiting queue

Press M, 65 and OK. A list of the documents

queuing for transmission will be printed.

Lock

You can block access to the keypad for numbers

or to the whole keyboard of your MF-JET.

Insert the code that will be needed to temporarily

unlock the keyboard.

1 Press M, 711 and OK.

2 Enter the four-digit interlock code and press

OK.

3 Enter the code one more time and press OK.

When a code is already registered, the machine

asks you ﬁ rst to give the old code before allowing

you to modify it.

Locking the keyboard

The access code must be entered each time the

machine is used.

1 Press M, 712 and OK.

2 Enter the four-digit interlock code and press

OK.

3 Use / to select WITH and press OK.

v After each operation, the machine locks

automatically.

To unlock the keyboard, enter WITHOUT

in step 3.

Locking numbers

You can also just lock the keypad for numbers

with a code. Transmissions are only possible

from numbers included in the directory.

1 Press M, 713 and OK.

2 Enter the four-digit interlock code and press

OK.

3 Use / to select only direct. and press

OK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips MF-Jet 440 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips MF-Jet 440

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info