Bedienungsanleitung Philips Mira M5602 (Seite 8 von 10) (Englisch)

664862

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

Frequently asked questions

No signal bar is displayed on the screen.

• The handset is out of range. Move it closer

to the base station.

• If the handset displays [Unregistered],

“Register additional handsets”).

If I fail to pair (register) the additional

handsets to the base station, what do I do?

• Your base memory is full. Access

[Services] > [Unregister] to unregister the

unused handsets and try again.

• If registration fails, unplug the power

adapter from the base station and plug it

back. Wait for 15 seconds, and then repeat

the registration procedure.

My handset is in searching or unavailable

status, what do I do?

• Make sure that the base station has power

supply.

• Move the handset closer to the base

station.

• Register the handset to the base station.

I have chosen a wrong language which I

cannot read, what do I do?

1 Press

to go back to the standby screen.

2 Press to access the main menu screen.

3 The following options will appear on the

screen:

[Phone setup] > [Language]

[Réglages] > [Langue]

[Telefon-Setup] > [Sprache]

[Cong. telef.] > [Lingua]

4 Select them to access the language

options.

5 Select your own language.

I have chosen a wrong country in Welcome

screen, what do I do?

Reset your phone settings to the original

factory settings (see the section on “Restore

default settings”).

I cannot change the settings of my voice

mail, what do I do?

The voice mail service is managed by your

service provider but not the phone itself.

Contact your service provider to change the

settings.

The handset on the charger does not charge

or the battery discharges too fast.

• Make sure the batteries are inserted correctly.

• Make sure the handset is placed properly on

the charger. If the docking tone is turned on,

you can hear the docking tone when you

place the handset on the charging cradle.

• The charging contacts are dirty.

Disconnect the power supply rst and

clean the contacts with a damp cloth.

• The battery is not fully recharged. Leave

the handset on the charging cradle for at

least 8 hours or until the battery icon on

the handset stops scrolling and indicates

full bar.

• The batteries are old or defective. Purchase

and replace with new rechargeable

batteries with the same specications.

Bad audio (crackles, echo, etc.)

• The handset is nearly out of range. Move it

closer to the base station.

• The phone receives interference from the

nearby electrical appliances. Move the

base station away from them.

• The phone is at a location with thick walls.

Move the base away from them.

• The phone receives interference from the

DSL (digital subscriber line) connection.

Install a DSL lter to prevent the noise.

Contact your service provider for the DSL

lter.

The caller ID does not display.

• The service is not activated. Check with

your service provider.

• The caller’s information is withheld or

unavailable.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips Mira M5602 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips Mira M5602

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info