Bedienungsanleitung Philips PSG9030 (Seite 11 von 110) (Alle Sprachen)

776047

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

ENGLISH

Problem Possible cause Solution

Steam is reected from the ironing

board and condenses on the iron. Use a board/board cover that allows steam to

penetrate through.

Water droplets come

out of the soleplate. The steam that was still present

in the hose has cooled down and

condensed into water. This causes

water droplets to come out of the

soleplate.

Steam away from the garment for a few seconds.

Some steam comes out

of soleplate when iron

is resting.

The iron has rested for a longer

period of time and is regulating to

ensure that the soleplate is at the

right temperature during rest. This is

normal.

If the steam continues for a long period when

the iron is resting, switch o the appliance and

remove the plug from the wall socket. Contact an

authorised Philips service centre.

Steam and/or water

come out from under

the EASY DE-CALC

knob.

The EASY DE-CALC knob is not

tightened properly. Switch o the appliance and let the appliance

cool down for 2 hours. Unscrew the EASY DE-

CALC knob and screw it back onto the appliance

properly. Note: Some water may escape when you

remove the knob.

The rubber sealing ring of the EASY

DE-CALC knob is worn. Contact an authorised Philips service centre for a

new EASY DE-CALC knob.

Dirty water and

impurities come out

of the soleplate or the

soleplate is dirty.

Impurities or chemicals present in the

water have deposited in the steam

vents and/or on the soleplate.

Clean the soleplate with a damp cloth.

Too much scale and minerals have

accumulated inside the appliance. Descale the appliance regularly (see chapter

‘Important - EASY DE-CALC’ and ‘Important

-Descaling the soleplate’).

The iron leaves a shine

or an imprint on the

garment.

The surface to be ironed was uneven,

for instance because you were ironing

over a seam or a fold in the garment.

ActiveSense is safe on all ironable garments. The

shine or imprint is not permanent and will come

o if you wash the garment. Avoid ironing over

seams or folds or you can place a cotton cloth

over the area to be ironed to avoid imprints at

seams and folds.

The appliance does not

produce any steam. There is not enough water in the

water tank (the ‘low water alert’ light

ashes).

Fill the water tank (see chapter ‘Using your

appliance’, section ‘Getting the product ready’).

The appliance is not hot enough to

produce steam. Wait until the ‘iron ready’ light on the iron lights

up continuously.

The automatic steam mode is o and

you did not press the steam trigger. Press the steam trigger and keep it pressed while

you iron or ensure that the automatic steam

mode is on.

The water tank is not placed in the

appliance properly. Slide the water tank back into the appliance rmly

(‘click’).

The appliance is not switched on. Insert the plug in the wall socket and press the

on/o button to switch on the appliance.

The Easy De-calc light is on. Descale the appliance (see chapter ‘IMPORTANT

- EASY DE-CALC’).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips PSG9030 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info