Bedienungsanleitung Philips REM400 (Seite 8 von 19) (Englisch)

492785

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

The DSS Universal Remote Control is

designed to be an enhanced replacement for

your original remote control.Although most

keys operate the same (see Key Charts on

page 3), some do differ or provide unique

features as described below.

DSS Directional Pad

The DSS remote control allows you to con-

trol the on-screen menu just like you would

with your original remote control. Pressing

the MENU key allows you to access the on-

screen menu of the component you have

selected (e.g. TV,VCR,CBL,AUD,DSS,or CD).

While in the menu, you can use the direc-

tional pad* to navigate and change the set-

tings of the menu. To exit out of the Menu

mode, either press the MENU key again or

the EXIT key (depending on how the original

remote control functioned).

*NOTE: If your component’s On-Screen menu

requires the use of the Volume and Channel

keys to navigate and change the On-Screen

menu settings, you will need to use the

VOL+

VOL–

CH+

,and

CH –

keys.

GUIDE Key

The GUIDE key works just like the Guide key

of your original remote control and allows

you to access the On-Screen guide* of the

component you have selected (e.g.CBL, DSS,

and some newer TVs).

While in the Guide mode, the directional

pad will allow you to navigate Up, Down,

Left and Right just like you would with your

original remote control.

To exit out of the Guide mode, either press

the GUIDE key again or EXIT (depending on

how the original remote control functioned)

to return to normal operation.

NOTE: *On-Screen guide is an interactive

channel listings menu that is available on

most DSS Satellite systems and is also used

with advanced converters being offered by

some cable systems. This feature is not applic-

able for all DSS or cable boxes.

SELECT Key

The SELECT key lets you choose features displayed

on the On-Screen menu and programs while in

the Guide mode.

If your original remote includes a Select key,

then the DSS’s SELECT key will operate in the

same manner for the selected component.

L1~L3 Keys

Use the learning (L1, L2, L3) keys to add

functions that are unique to your home

entertainment components (e.g., Tracking

Up or Down for a VCR).

NOTE: Please have your original remote con-

trols handy before programming learning. Be

sure to press each key within 10 seconds of the

previous entry. If not, the remote control will

exit the programming mode.

To Program The L Keys:

1. On the DSS remote control, press

and hold SET until the red light

blinks twice,then release SET.

2. Enter 9-7-5.The red light will

blink twice.

3. Press the component

key once in which

you want to learn a

feature (e.g.,TV).

4. Press the L key once (e.g.,L1~L3)

in which the new feature is to be

learned. The red light will blink

rapidly.

5. Place your original remote con-

trol head to head (about 2" apart)

from the DSS remote control.

6. On your original remote control,

press and hold the key (i.e., fea-

ture) to be learned until the red

light on the DSS remote control

blinks twice. If the red light does

not blink twice, stop and repeat

steps 1 through 5.

7. To learn functions on the other

L keys,repeat steps 3 through 6.

8. To lock in new feature(s) on the

DSS remote control,press and hold

SET until the red light blinks twice.

9. To test a new feature, press the

component key that was learned

once.Then press the L key where

the component’s feature was

learned.

OPERATING YOUR REMOTE CONTROL

REM400 Manual Engl 12/28/99 12:01 PM Page 8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips REM400 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info