Bedienungsanleitung Philips RQ 1160 (Seite 9 von 232) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

450367

Zoom out

Zoom in

Vorherige Seite

1/232

Nächste Seite

Note: You can also brush the shaving head holder with the cleaning brush supplied.

3 Carefully shake off excess water and let the shaving unit dry.

Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads.

4 Reattach the shaving head holder to the bottom of the shaving unit (‘click’) (Fig. 27).



The Jet Clean System has an automatic cleaning program. When you press the on/off button, the Jet Clean System starts cleaning in the

automatic cleaning program.



Fill the cleaning chamber before rst use.

1 Put the small plug in the Jet Clean System.

2 Put the adapter in the wall socket.

, The holder automatically moves to the highest position.

3 Simultaneously press the release buttons on both sides of the cleaning chamber (1). Then lift the Jet Clean System off the cleaning

chamber (2). (Fig. 28)

, The cleaning chamber remains behind.

4 Unscrew the cap from the bottle with cleaning uid.

5 Fill the cleaning chamber with HQ200 cleaning uid to a level between the two lines (Fig. 29).

6 Place the Jet Clean System back onto the cleaning chamber (Fig. 30).

Make sure the release buttons click back into place.



Note: If you use the shaver with shaving foam or shaving gel, we advise you to rinse it under the hot tap before you clean it in the Jet Clean System. This

guarantees an optimal lifetime for the cleaning uid.

1 Place the shaver upside down in the holder with the display pointing towards the front of the Jet Clean System (Fig. 18).

2 Press the shaver tightly into the holder to lock it into place (Fig. 19).

, The display shows that the shaver is charging (see chapter ‘The display’).

3 Press the on/off button on the Jet Clean System to start the cleaning program. (Fig. 31)

, The shaver display stops showing the charging indication.

, The cleaning light starts to ash and the shaver is automatically lowered into the cleaning uid (Fig. 32).

, The cleaning light ashes throughout the cleaning program, which takes a few minutes.

, During the rst phase of the cleaning program, the shaver automatically switches on and off several times and moves up and down.

, During the second phase of the cleaning program, the shaver is placed in the drying position, indicated by the ashing drying symbol.

This phase takes approx. 2 hours. The shaver stays in this position until the end of the program. (Fig. 33)

, After the cleaning program, the charging indication appears on the shaver display (see chapter ‘The display’).

Note: If you press the on/off button of the Jet Clean System during the cleaning program, the program aborts. In this case, the cleaning or drying light

stops ashing and the holder moves to the highest position.

Note: If you remove the adapter from the wall socket during the cleaning program, the program aborts. The holder remains in its current position. When

you put the adapter back into the wall socket, the holder moves to the highest position.

- When the cleaning uid drops below the minimum level, the ‘cleaning chamber empty’ symbol starts to ash and the holder returns to its

starting position (Fig. 34).

- If you use the washing machine to clean your shaver every day, you need to rell the cleaning chamber approx. every 15 days.



Clean the cleaning chamber every 15 days.

You can wipe the outside of the Jet Clean System with a damp cloth.

1 Simultaneously press the release buttons on both sides of the Jet Clean System (1). Then lift the Jet Clean System off the cleaning

chamber (2). (Fig. 28)

, The cleaning chamber remains behind.

2 Pour any remaining cleaning uid out of the cleaning chamber. (Fig. 35)

You can simply pour the cleaning uid down the sink.

3 Rinse the cleaning chamber under the tap (Fig. 36).

The cleaning chamber is not dishwasher-proof.

4 Fill the cleaning chamber with HQ200 cleaning uid to a level between the two lines (Fig. 29).

5 Place the Jet Clean System back onto the cleaning chamber. (Fig. 30)

Make sure the release buttons click back into place.



Make sure the appliance is switched off.

1 Pull the shaving head holder off the bottom part of the shaving unit (Fig. 26).

2 Slide the green retaining frame in the direction of the arrows indicated of the retaining frame (Fig. 37).

3 Lift the retaining frame out of the shaving head holder. (Fig. 38)

4 Remove the cutter from the shaving guard (Fig. 39).

 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips RQ 1160 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info