Bedienungsanleitung Philips S10 (Seite 16 von 62) (Englisch)

508101

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

14 EN

» When S10/S10A and the mobile

phone are paired, or is displayed

on the handset screen.

Tip

• The default Bluetooth PIN/passcode is 0000.

Note

• The phone can be connected up to 2 Bluetooth

devices simultaneously.

• The phone can store up to 8 devices, to which it will

reconnect automatically if they are in range, and less

than 2 devices are connected. If more than 8 devices

have been paired, delete some devices from the list

before pairing another one. See 'Manage your mobile

phone's connection' in this chapter for information.

• If the name of S10/S10A exists in your mobile phone,

you have to remove it from your mobile phone. Then

you can do the pairing again.

Manage your mobile phone's

connection

You can manage your mobile phones list in this

way:

1 Tap from the main menu screen.

2 Select [Mobile/Computer].

» The mobile phones and computers list

are displayed.

3 Select a mobile phone, then select [Privacy

mode]/[Disconnect device]/[Delete

device].

Note

• If 2 devices are connected, you have to disconnect a

device before connecting another one.

• You can see [Disconnect device] in the option list only

when the mobile phone is connected; and [Connect

device] only when the mobile phone is disconnected.

• For information on [Privacy mode], refer to the next

section.

Mobile settings

You can set the privacy mode or change the

PIN/passcode through [Mobile settings].

Privacy mode

You can select this option to set whether the

mobile's contacts are available for viewing.

To access this menu, press the PIN/passcode

(0000). Select among 2 options: [Auto range]

and [Change PIN].

From [Auto range], you can set whether the

mobile's contacts are available for viewing.

You can select among these 3 options:

• [Off] : no PIN/passcode is required to

access the mobile's contacts which are

always available for viewing.

• [Auto range] : no PIN/passcode

is required to access the mobile's

contacts which are available for viewing

only when the mobile phone is within

the Bluetooth range.

• [PIN] : follow the on-screen instruction

to activate or change the PIN/

passcode. If you choose this option,

your mobile's contacts are always

available on your S10/S10A, but a PIN/

passcode is required anytime you want

to access them.

From [Change PIN], you can change your PIN/

passcode for the privacy mode.

Delete a device

You can select this option to delete your device.

Disconnect a device

You can select this option to disconnect your

device.

Note

• If 2 devices are connected, you have to disconnect a

device, before connecting another one.

• You can see [Disconnect device] in the option list only

when the mobile phone is connected; and [Connect

device] only when the mobile phone is disconnected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips S10 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips S10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info