Bedienungsanleitung Philips S221C4 (Seite 4 von 41) (Englisch)

551559

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

1. For your safety

• The SMART All-in-One is equipped with

a three-pronged grounded plug, a plug

with a third (grounding) pin. This plug will

fit only into a grounded power outlet as

a safety feature. If your outlet does not

accommodate the three-wire plug, have an

electrician install the correct outlet, or use

an adapter to ground the appliance safely.

Do not defeat the safety purpose of the

grounded plug.

• Unplug the unit during a lightening storm

or when it will not be used for long period

of time. This will protect the SMART All-in-

One from damage due to power surges.

• Do not overload power strips and

extension cords. Overloading can result in

fire or electric shock.

• Never push any object into the slot on the

SMART All-in-One cabinet. It could short

circuit parts causing a fire or electric shock.

Never spill liquids on the SMART All-in-

One.

• Do not attempt to service the SMART All-

in-One by yourself; opening or removing

covers can expose you to dangerous

voltages and other hazards. Please refer all

servicing to qualified service personnel.

• To ensure satisfactory operation, use

the SMART All-in-One only with UL

listed computers which have appropriate

configured receptacles marked between

100 - 240V AC, Min. 5A.

• The wall socket shall be installed near the

equipment and shall be easily accessible.

• For use only with the attached power

adapter (Output 19V DC) which have UL,

CSA listed licensed (only for SMART All-In-

One with power adapter).

Model: ADPC1965

Manufacturer: TPV ELECTRONICS

(FUJIAN) CO., LTD.

Model: ADS-65LSI-19-1 19065G

Manufacturer: SHENZHZEN HONOR

ELECTRONIC CO., LTD.

1.2 Cleaning

• Clean the cabinet regularly with cloth. You

can use soft-detergent to wipe out the

stain, instead of strong-detergent which will

cauterize the product cabinet.

• When cleaning, make sure no detergent is

leaked into the product. The cleaning cloth

should not be too rough as it will scratch

the screen surface.

• Please disconnect the power cord before

cleaning the product.

1.3 Special notes on SMART All-in-

One

The following symptoms are normal with

SMART All-in-One and do not indicate a

problem.

Note

• Due to the nature of the fluorescent light,

the screen may flicker during initial use. Turn

off the Power Switch and then turn it on

again to make sure the flicker disappears.

• You may find slightly uneven brightness

on the screen depending on the desktop

pattern you use.

• The LCD screen has effective pixels of

99.99% or more. It may include blemishes

of 0.01% or less such as a missing pixel or a

pixel lit all of the time.

• Due to the nature of the LCD screen, an

afterimage of the previous screen may

remain after switching the image when the

same image has been displayed for a long

time. The SMART All-in-One will slowly

recover from this.

• When the screen becomes black or

flashing, or cannot illuminate any more,

contact your dealer or service center to

replace parts. Don’t repair the screen by

yourself!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips S221C4 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips S221C4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info