Bedienungsanleitung Philips-Saeco HD8527 Estrosa (Seite 20 von 80) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

507558

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

• 20 •

22 Ground co ee  lter

(single piece for 1 or 2 co ee(s))

23 Co ee pod  lter adapter

24 Co ee pod  lter

25 "Intenza+" water  lter (sold separately)

4 Installation

For your own and other people safety, carefully follow

the "Safety Regulations" indicated in chapter 3.

4.1 Packaging

The original packaging has been designed and manufactured

to protect the machine during transport. We recommend

keeping the packaging material for possible future transport.

4.2 Installation Precautions

Do not move the machine by grabbing the cup

protection grilles.

Before installing the machine, read the following safety pre-

cautions carefully:

• Place the machine in a safe place.

• Make sure children cannot play with the machine.

• Do not place the machine on hot surfaces or near open

 a m e s .

The co ee machine is now ready to be connected to the electric

network.

Note: we recommend washing the components

before using them for the  rst time and/or af-

ter they have not been used for a certain period of time.

4.3 Water tank

•

Remove the water tank (5).

•

Rinse it and  ll it with fresh drinking water, making

sure that the (MAX) level indicated in the tank is not

exceeded.

Fill the tank only with fresh, non-sparkling,

drinking water. Hot water or any other liquid

may damage the tank. Do not operate the machine

when the water level in the tank is below the MIN

threshold. Make sure there is enough water in the wa-

ter tank.

• Insert the water tank into its seat in the co ee machine

and make sure that it locks into place - its pro le should

adhere to that of the co ee machine.

Note: the water level can be checked looking

through the window on the front side of the

tank.

4.4 Machine Connection

Electric power may be very dangerous! It is

therefore necessary to strictly follow the safety

regulations. Do not use faulty power cords. Faulty cords

and plugs must be replaced immediately by Authorised

Service Centres.

The voltage of the appliance has been pre-set by the manu-

facturer. Check that the voltage matches the indication on the

data plate at the bottom of the appliance.

•

Insert the plug into the socket on the back of the

machine.

•

Insert the other end of the plug into a wall socket with

suitable power voltage.

4.5 First Use

At  rst start-up, the co ee machine circuit must be primed.

Press the ON/OFF button (10); when the (14 )" ", (16 )"

" and (17) lights " " start blinking, the circuit must

be primed.

Place a container under the steam wand (Pannarello).

Open the "hot water/steam" knob (3) by turning it

clockwise. The pump is activated automatically. Wait

until a steady jet of water  ows out of the steam wand

(Pannarello).

Close the "hot water/steam" knob (3) by turning it

counter-clockwise. Remove the container.

The machine begins the warm-up phase only after the water

circuit has been correctly primed.

Note: if the knob is left open, the pump is auto-

matically disengaged after a few seconds and

the "

" light (16) starts blinking.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips-Saeco HD8527 Estrosa Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips-Saeco HD8527 Estrosa

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info