677736
34
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
• 24 •
1- To prepare a cappuccino, insert an espresso capsule (black) as
described in the section “Brewing coee”.
2- Insert the carafe into the machine and ensure that the milk is
above the MIN level.
3- Adjust the machine to t the mug into which your cappuc-
cino will be dispensed (see section Adjusting the dispensing
height”).
4- Insert a mug below the coee and milk
dispensing spouts.
5- Press the Cappuccino button
.
6-
The
Cappuccino button ashes;
the machine is warming up.
7- When it has nished warming up, the
machine dispenses the frothed milk
directly into the mug. The machine will
stop dispensing when it reaches the
preset quantity. The dispensing process can be stopped early by
pressing the Cappuccino button
.
8-
When it has nished dispensing the milk, the machine automati-
cally dispenses the espresso coee directly into the mug.
The dis-
pensing process can be stopped early by pressing the Cappuc-
cino button
.
When the cappuccino has nished brewing, the rinse
button
will light up to remind you that the milk
circuit must be rinsed; see the section “Rinsing the milk cir-
cuit in this chapter.
Adjusting the amount of cappuccino
The machine allows you to adjust the amount of cappuccino brewed
according to your taste and the size of your mug.
Before brewing the cappuccino, check that the On/O
button
and beverage buttons are constantly lit
and that there is enough water in the tank.
Proceed as follows to set the desired quantity of cappuccino
:
1- Insert an espresso capsule into the appropriate compartment.
2- Insert the carafe into the machine and ensure that the milk is
above the MIN level.
3- Press and hold the Cappuccino button
for 3 seconds until it
ashes in brief intervals. Then release the button.
4- Press the Cappuccino button
again when the amount of
milk in the mug reaches the desired level. The machine has
saved the desired amount of milk and will start to brew the es-
presso.
5- Press the Cappuccino button
again when the amount of
coee in the mug reaches the desired level. The machine has
saved the desired amount of espresso.
At this point the Cappuccino button
has been reprogrammed;
each time it is pressed, the machine will disperse the same amount
of milk and espresso that was just programmed.
Minimum quantity of espresso that can be set: approx. 30ml
Maximum quantity of espresso that can be set: approx. 300ml
Minimum quantity of milk that can be set: approx. 50ml
Maximum quantity of milk that can be set: approx. 300ml
Preset quantities
Cappuccino approx. 90ml milk
approx. 40ml espresso
Restoring the preset quantities
To reset beverages to their factory settings, with the machine o,
press and hold the On/O
and Filter coee (blue) buttons
for 5 seconds. All the buttons will ash twice in conrmation.
Frothed milk
Before preparing the frothed milk, check that the
On/O button
and beverage buttons are con-
stantly lit and that there is enough water in the tank.
Remember, it is not necessary to insert a coee
capsule in order to prepare frothed milk.
1- Insert the carafe in the machine and ensure that the milk is
above the MIN level.
2- Adjust the machine to t the glass
into which your frothed milk will be
dispensed (see section ''Adjusting the
dispensing height'').
3- Place a glass under the milk dispensing
spout.
4- DO NOT insert a coee capsule into the
capsule compartment.
5- Press the Frothed milk button
.
6-
The
Frothed milk button ashes; the machine is warming up.
7- When it has nished warming up, the machine dispenses the
frothed milk directly into the glass. The machine will stop dis-
pensing when it reaches the preset quantity. The dispensing
process can be stopped early by pressing the Frothed milk but-
ton
.
When the machine has nished preparing the frothed
milk, the rinse button
will light up to remind you
that the milk circuit must be rinsed; see the section ''Rinsing
the milk circuit'' in this chapter.
Adjusting the amount of frothed milk
The machine allows you to adjust the amount of frothed milk pre-
pared according to your taste and the size of your glass.
Before preparing the frothed milk, check that the
On/O button
and beverage buttons are con-
stantly lit and that there is enough water in the tank.
34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

philips-saeco-hd8603---cafissimo-latte

Suche zurücksetzen

  • Wie entkalke ich meine Maschine von Tschibo Hd 8603 Eingereicht am 3-9-2020 11:02

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Philips-Saeco HD8603 - Cafissimo Latte wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info