Bedienungsanleitung Philips-Saeco HD8904 Intelia de Luxe (Seite 11 von 60) (Englisch)

604506

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

4 The display shows the following icon to indicate that the machine enters the descaling cycle.

Ifyouwanttoexitthedescalingcycle,presstheESCbuttontoexit.(Fig.23)

5 Pour the entire bottle of Saeco descaling solution (250ml) into the water tank.

6 AddwatertothedescalingsolutioninthewatertankuptotheCALCCLEANindication.

7 Place a large container (1.5 l) under the steam wand and dispensing spout. (Fig. 24)

8 Press the OK button to start the descaling cycle.

, The machine dispenses the entire descaling solution at regular intervals through the steam

wand and dispensing spout (this takes approximately 25 minutes).

9 Waituntilallofthedescalingsolutionhasbeendispensed.Removeandemptythecontainer.

10 Remove and empty the drip tray. Slide the drip tray back into the machine.

11 RinsethewatertankandllitwithfreshwateruptotheCALCCLEANindication.Slidethe

water tank back into the machine.

12 Place the container back under the steam wand and dispensing spout.

13 Press the OK button to start the rinsing cycle (this takes approximately 4 minutes).

, Thedisplayshowsthefollowingicontoindicatethattherinsingcycleisnished.(Fig.25)

14 The display shows a tick icon.

15 RinsethewatertankandllitwithfreshwateruptotheMAXlevel.Slidethewatertank

back into the machine.

16 Press the OK button to end the descaling cycle.

17 Place a container under the steam wand and dispensing spout.

18 The display shows the following icon to indicate that the machine is heating up. (Fig. 26)

, The machine performs an automatic rinsing cycle.

19 Remove the container. Remove and empty the drip tray. Slide the drip tray back into the

machine.

20 PlacetheAquaCleanlterbackinthewatertank.Reinserttheautomaticmilkfrother.

21 Remove and rinse the brew group see chapter ‘Cleaning and maintenance’, section ‘Clean the

brew group’.

The machine is now ready for use.

Interruption of the descaling cycle

Once the descaling cycle has started, you must complete it till the very end without turning off the

machine. In case you get stuck during the cycle or in case of power failure or accidental

disconnection of the power cord, you can exit by pressing the on/off button. If this occurs, empty

and rinse carefully the water tank, then ll it up to the CALC CLEAN level. Follow the instructions

in chapter ‘First installation’, section ‘Manual rinsing cycle’ before brewing any beverage. If the cycle

was not completed, the machine will require another descaling cycle to be performed at your

earliest convenience.

ENGLISH 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips-Saeco HD8904 Intelia de Luxe Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips-Saeco HD8904 Intelia de Luxe

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info