Bedienungsanleitung Philips-Saeco SM5478 (Seite 10 von 216) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

682227

Zoom out

Zoom in

Vorherige Seite

1/216

Nächste Seite

1. Activating the AquaClean filter during first installation

After switching on for the first time, the machine guides you through the first installation steps such as

filling the water tank, filling the water circuit and activating the AquaClean filter. Simply follow the

instructions on the screen.

2. Activating the AquaClean filter when prompted

Note: Replace the AquaClean filter as soon as the capacity has dropped to 0% and the filter icon

flashes quickly. Replace the AquaClean filter at least every 3 months, even if the machine has not yet

indicated that replacement is required.

Tip: We advise you to buy a new filter when the capacity has dropped to 10% and the filter icon starts

flashing slowly. This ensures that you can replace the filter when the capacity has dropped to 0%.

1 Press the MENU/SPECIAL DRINKS button, scroll to AQUACLEAN FILTER and press the OK button

to confirm.

The display asks if you want to activate a new filter.

2 Press the OK button to confirm.

The display automatically updates the number of filters used (Fig. 5).

Note: If you want to replace the AquaClean filter after 8 filters have been used, you first need to

descale the machine. Follow the instructions on the display.

3. Activating the AquaClean filter at any other time

You can start (re)using the AquaClean filter at any time by following the instructions below.

1 Press the MENU/SPECIAL DRINKS button, select MENU and press the OK button to confirm. Scroll

to AQUACLEAN FILTER. Press the OK button to confirm.

The display shows the numbers of AquaClean filters that have been installed previously from 0

to 8 filters (Fig. 5).

2 Select ON on the display and press the OK button to confirm.

The display automatically updates the number of filters used (Fig. 5).

Then the 'machine ready' screen appears with the AquaClean 100% icon to indicate that the

filter has been installed (Fig. 6).

3 Dispense 2 cups of hot water (0.5 l) to complete the activation. Discard this water.

Note: In some situations the machine will tell you that you need to descale the machine before you

can install and activate a new AquaClean filter. This is because your machine has to be completely

limescale-free before you start to use the AquaClean filter. Follow the instructions on the screen.

Using the control panel

Below you find an overview and description of the control panel of the machine. Some of the buttons

have a double function; if applicable the navigation icons appear on the display. Use the buttons next

to this icon to select or confirm your choices.

Use the MENU/SPECIAL DRINKS button to select other drinks and to change settings such as the

water hardness and coffee temperature.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips-Saeco SM5478 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info