Bedienungsanleitung Philips-Saeco SUP 012 Magic de Luxe (Seite 10 von 11) (Englisch)

609100

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

DESCALING

36 Remove the coffee rest drawer (20) and

clean it, using a non-abrasive soap.

Clean the service area thoroughly with a damp

cloth and re-insert the coffee grounds container

again.

37 By holding the central unit by its handle, slide

it back into its original position, making sure it is

correctly engaged.

Then close the service door. Insert the coffee

grounds container again.

When replacing the central unit, do

not press the "PRESS" key (it may

cause damages to the machine)!

Warning: if the central unit is not correctly in-

serted, the warning light

switches on, thus

preventing the machine from brewing coffee.

Coffee grinder

Never fill the coffee grinder with wa-

ter: it may damage the machine!

38 Should coffee grains stick together in the

container, the latter must be cleaned; unplug the

machine before carrying out this operation.

Empty the coffee container and loosen the two

screws.

The container can now be removed and cleaned.

39 Carefully pull the adjustment lever upwards.

40 Turn the adjustment ring towards the left to

make the blue marks coincide.

41 Now remove the grind ring from the ma-

chine, pulling it slightly upwards.

42 With the aid of a brush or a narrow vacuum

hose, clean both the coffee grinder box and the

grind ring support.

Make sure the position of the grind ring does not

shift.

To re-assemble the coffee grinder, carry out the

reverse sequence, making sure the adjustment

ring has not been shifted during cleaning.

If that is the case, turn the adjustment ring to make

the blue mark coincide with one of the three

notches.

Assemble the grind ring support and make sure the

blue marks coincide.

43 Turn the adjustment ring clockwise to make

the red marks coincide.

44 Fit the adjustment lever on the ring, making

sure the grind level is on position 6.

Descaling

Descaling is necessary to remove limescale from

surfaces and holes, thus ensuring a perfect

operation of valves, heating controls and other

important parts.

According to water hardness, the machine must

be descaled every 3-4 months, according to the

water hardness degree.

A more frequent descaling is recommended

wherever the water hardness degree is very

high.

This machine is supplied with a particular warn-

ing light

to make this operation easier.

Descaling must be carried out at the latest when

this warning light switches on.

Furthermore, said warning light may be adjusted

according to the water hardness degree.

The machine has been adjusted at the factory to

a 25°fH value, which causes the warning light

to switch on after approx. 150l.

The water hardness value may be changed, if

necessary, following the instructions shown on

page 30.

The following adjustments are possible:

45 Hardness index 1: high water hardness,

exceeding 29°fH (14°dH), approx. 80 l water

passage.

46 Hardness index 2: medium water hard-

ness, approx. 20-29°fH (7-14°dH), approx.

150 l water passage.

47 Hardness index 3: soft water, approx. 12-

20°fH (47°dH) approx. 300 l water passage.

48 Hardness index 4: very soft water, less than

10°fH (3°dH), more than 500 l of water pas-

sage.

In case of hard water, a filter should be used both

to improve the coffee quality and to protect the

machine, thus reducing the descaling frequency.

Descaling must be carried out as follows:

Note: for this purpose, use a descaling product

suitable for coffee machines.

Never use vinegar to clean the machine; it

might damage it.

There are two ways to carry out the descaling of

the machine:

Automatic descaling

Turn the machine off.

Pour descaling solution into the water tank

(according to the instructions on the descaling

solution package).

Switch the machine on to the programming

mode (see page 30, point 27).

Place a large container under the steam/hot

water dispensing tube (5) and open the steam/

hot water knob (6) slowly.

The contents of the tank are pumped quickly

through the machine, saving time.

Standard descaling

Switch off the machine.

Pour a descaling product into the water tank

(according to the instructions on the descaling

solution package).

Switch the machine on to the programming

mode. Place a large container under the steam/

hot water dispensing tube (5) and open the

steam/hot water knob (6) slowly, turning it

counterclockwise.

Turn on the machine by pressing the main switch

(31) and let the descaling product flow out of the

dispensing tube for approx. 1 min.

Close the knob again.

Turn off the machine with the main switch and let

the solution take effect for approx. 5 minutes.

Repeat this procedure two or three times, to

allow all of the descaling product in the water

tank to flow out of the dispensing tube.

As soon as descaling has been carried out, rinse

the tank (8) thoroughly and fill it with fresh water.

Switch on the machine and let fresh water

(approx. 2 l) flow out of the steam/hot water

dispensing tube in order to rinse away residue.

The machine is now ready for operation.

When the machine is on, the

warning light

switches off automatically, by pressing the steam

selection button for at least 5 seconds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips-Saeco SUP 012 Magic de Luxe Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info