3 Press key 1 and count the number of times the green LED
flashes. This is the first digit of the 4-digit code. (No
flashes means the digit is zero.)
4 Press key 2 and count the number of flashes for the second
digit.
5 Press key 3 and count the number of flashes for the third
digit.
6 Press key 4 and count the number of flashes for the forth
digit.
7 Note the code.
Add a specific function to your remote control
In case you do not find the function you want to use (e.g. a
specific teletext function), it can easily be added to your
remote control’s functionality. All you have to do is contact
the Philips Universal Remote Control helpline to obtain the
3-digit code for the missing function. The rest of the
procedure is quite simple:
1 Pres
s and hold keys 1 and 6 simultaneously - for about
three seconds - until the green LED lights up.
2 Enter 9, 9 and 4, using the number keys.
3 Enter the 3-digit code you received from the helpline
using the number keys, within 30 seconds.
4 Press the key under which you want to store the new
function. The LED flashes twice to indicate a succesfull
installation.
If you want to store the function under a Shift/Key
combination; first press Shift, then press the required
function key.
N
OTE
- The original function of the key will be overwritten. If you
want to return to its original function see the following section
about resetting.
- Remember: no functions can be performed by this remote
control that are not present on the equipment you are
operating!
Reset your remote control to its original
presets:
If you want to return to the original functions of all keys and
delete all added functions under programmed keys a simple
reset procedure is sufficient:
1 Pres
s and hold keys 1 and 6 simultaneously - for about
three seconds - until the green LED lights up.
2 Enter 9, 8 and 1, using the number keys.
-
The LED flashes twice to indicate a succesfull reset.
The keys on your remote control will now perform their
default functions.
Instructions for use
5
English
