Bedienungsanleitung Philips SC1996 - Lumea Essential (Seite 26 von 146) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Türkisch)

561198

Zoom out

Zoom in

Vorherige Seite

1/146

Nächste Seite

Problem Possible cause Solution

The skin reaction

after the treatment

lasts longer than

usual.

You have used a

light intensity that

is too high for you.

Select a lower light intensity the next time. See chapter

‘Preparing for use’, section ‘Light intensity. If the skin reaction

lasts longer than 3 days, contact your doctor.

The hair-reduction

results are not

satisfactory.

You have used a

light intensity that

is too low for you.

Perform a skin test to determine if you can use a higher light

intensity (see chapter ‘Using the appliance’’ , section ‘First use

and skin test’.

You did not make

enough overlaps

when you used

the appliance.

For proper hair-reduction results, you have to make overlaps

when you use the appliance. See chapter ‘Using the appliance’,

section ‘Subsequent use’, step 4.

You do not use

the appliance

as often as

recommended.

To remove all hairs successfully and to prevent the hair

root from becoming active again, the treatments have to be

repeated once every two weeks for the rst two months. To

ensure that your skin stays smooth, we advise you to repeat

the treatment every four to six weeks. The time between

treatments may vary based on your individual hair regrowth

and also across different body areas. If too many hairs grow

back between treatments, simply shorten the treatment

interval again, but do not treat any area more often than

once every two weeks. When you use the appliance more

frequently than recommended, you do not increase the

effectiveness but you do increase the risk of skin reactions.

You respond

more slowly to IPL

treatment than the

average user.

Continue using the device for at least 6 months, as hair

regrowth can still decrease over the course of this period.

Also take into account the other solutions to this problem.

The appliance is

not suitable for

your hair colour or

skin tone.

Do not use the appliance if your body hair is light blond, red,

grey or white. Do not use the appliance either if you have

dark skin. Consult the body hair colour and skin tone table in

the Quick Start Guide.

Hair starts to

grow again in

some spots on the

treated areas.

You did not make

enough overlaps

when you used

the appliance.

For proper hair-reduction results, you have to make overlaps

when you use the appliance. See chapter ‘Using the appliance’,

section ‘Subsequent use’, step 4.

Hair starts to grow

again as part of

the natural cycle of

hair growth.

This is normal. It is part of the natural cycle of hair growth

that hair starts growing again. The hairs that come back,

however, tend to be softer and thinner.

The appliance

does not work.

The appliance is

defective.

Contact the Consumer Care Centre in your country, your

Philips dealer or a Philips service centre.

ENGLISH26

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips SC1996 - Lumea Essential Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info