Bedienungsanleitung Philips SCD570 (Seite 16 von 328) (Alle Sprachen)

666634

Zoom out

Zoom in

Vorherige Seite

1/328

Nächste Seite

7.3.2 Activating Eco Max mode

1 Select ‘Eco Max’ in the menu with the + and -



2 When the display shows ‘Turn On’, press OK

to switch on the Eco Max mode.

3 The warning message ‘!No alert if out of

range, OK?’ appears on the display. Press OK



Note:

The warning message scrolls across the display

twice. If you do not press OK, the parent

unit leaves the menu and the Eco Max mode

remains off.

• The Eco Max indication ashes on the

display and the ‘link’ light ashes green slowly.

• When the parent unit receives a DECT

signal from the baby unit because the baby

makes a sound, the ‘link’ light turns solid

green again.

7.3.3 Deactivating Eco Max mode

1 Press the MENU button

2 Use the + and - buttons to select ‘Eco Max’



3 Use the + and - buttons to select ‘Turn Off’



7.4 Nightlight

This option in the parent unit menu allows you to

switch the nightlight on the baby unit on and off.

1 Select ‘Nightlight’ in the menu with the + and



2 Use the + and - buttons to choose ‘Turn On’.

• The nightlight symbol Q appears on the display.

7.3 Eco Max mode

This baby monitor has a built-in Smart Eco mode

that automatically reduces the DECT signal from

the baby unit as the distance between parent unit

and baby unit becomes shorter. By reducing radio

transmission, it helps to save energy.

If you want to save even more energy and to stop

radio transmission, activate the Eco Max mode

in the menu of the parent unit. In this mode, the

DECT signal of the baby unit is switched off. As

soon as the baby makes a sound, the DECT signal

of the baby unit automatically switches on again.

Caution:

InEcoMaxmode,theparentunitreceives

feedbackfromthebabyunitwithadelay.When

yourbabymakesasound,thebabyunitrsthas

toreactivateradiotransmissionbeforeitcan

send feedback to the parent unit.

7.3.1 Please note the following:

• Before you select Eco Max mode, make sure

that the parent unit and baby unit are within

operating range, see section ‘Operating range’

in chapter ‘Using the baby monitor’. In Eco

Max mode you do not receive feedback when

the parent unit is out of range of the baby

unit. You can check the link by pressing any

button on the parent unit.

• If there is no radio transmission from the baby

unit to the parent unit in Eco Max mode, the

sound level lights on the parent unit are off.

The sound level lights go on when the baby

unit reactivates radio transmission because

the baby makes a sound above the selected

sensitivity level.

• If you want to operate the baby monitor in

Eco Max mode, make sure that the sensitivity

level is set between 1 and 3. If the sensitivity

level is set to level 4, the baby unit does not

switch off radio transmission in Eco Max

mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips SCD570 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info