Bedienungsanleitung Philips scf 870 (Seite 13 von 100) (Deutsch, Englisch, Holländisch, Französisch)

400873

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

1 Unplug the appliance and remove the jar from the motor unit (Fig. 19).

2 Remove the lid from the jar and turn the lid upside down (Fig. 20).

3 remove the sieve and the valve from the lid. (Fig. 21)

4 Remove the blade unit from the jar (Fig. 22).

5 Clean the blade unit under the tap thoroughly, immediately after use. Make sure you also

rinse the inside of the tube of the blade unit (Fig. 23).

Handle the blade unit very carefully. The cutting edges are very sharp.

Note: If you want to clean the blade unit more thoroughly, you can also place it in the dishwasher after

you have rinsed it.

6 Clean the other parts that have come into contact with food in hot water with some

washing-up liquid immediately after use.

Note: All parts, except the motor unit, can also be cleaned in the dishwasher.

7 If necessary, clean the motor unit with a moist cloth.

8 Check if any food particles have entered the water tank. You can do this by looking into the

lling opening to see if there are any food particles in it or by checking if the water has an

unusual colour and by smelling if the water tank produces an unpleasant or a burnt smell. If

this is the case, clean the water tank (see section ‘Descaling the water tank’ in this chapter).

9 Leave the lid of the lling opening open to prevent bacterial growth.



If food particles enter the water tank, they may get stuck to the heating element in the water tank

during the next steaming processes. These particles cannot be removed by just rinsing the water

tank.

In addition, you have to descale the appliance every four weeks to ensure it continues to work

100% effectively. To reduce scale build-up, it is helpful to use pre-boiled or ltered water in the

appliance.

To remove food particles inside the water tank and to descale the appliance, follow the descaling

instructions below.

1 Make sure the appliance is switched off.

2 Add one sachet of citric acid (10g) to 200ml of warm water.

Note: You can also use a solution of 150ml water and 50ml white vinegar (8% acetic acid).

3 Fill the water tank with the solution of citric acid (or vinegar) and water.

4 Close the lid of the lling opening.

5 Place the empty jar (without any food inside) fully assembled with blade unit and lid on the

motor unit in steaming position (i.e. with the lid pointing downwards).

6 Turn the control knob to steaming position.

, The steaming light lights up orange to indicate that the appliance is steaming.

7 Switch off the appliance after 5-6 min of steaming and unplug it.

8 Pour the used solution of citric acid (or vinegar) and water out of the water tank. (Fig. 24)

9 Rinse the water tank and the jar thoroughly with fresh water several times.

10 Fill the tank with 200ml water and let the appliance complete a steaming process of 20

minutes with the empty jar before you use the appliance with food again.

 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips scf 870 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info