Bedienungsanleitung Philips SCN350 Screeneo U4 (Seite 16 von 24) (Englisch)

811249

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

16 Philips · Screeneo U4

• Audio Output: Select the projector's audio

output type. Tip: You can more quickly

switch between the internal speaker and

Bluetooth output by pressing on

the remote control.

• Internal Speaker: Use the projector's

internal speaker to output audio.

• Bluetooth Output: Use the Bluetooth

devices paired with the projector to

output audio.

• ARC: Use an HDMI™ ARC compatible

device to output audio.

• CEC: Turn HDMI™ CEC (Consumer

Electronics Control) on or off. The default

value is ON.

• Sleep Timer: Select a period of time after

which the projector turns off automatically.

The default value is Disabled.

• UHD Video: Turn the UHD Video mode on

or off. The default value is OFF.

• Turn Off Screen: Turn off the projection

screen without turning off the projector.

Press any button on the remote control to

turn the screen back on.

Color and sound settings

You can view and change the following color

and sound settings.

• Picture Preset: Select a predefined color

brightness setting for picture and video

display, or select User to customize color

values on brightness, contrast, saturation,

hue and sharpness. Tip: You can more

quickly change the picture preset by

pressing on the remote control.

• HDR Brightness: Set the brightness for high

dynamic range (HDR).

• Sound Preset: Set the sound effect to Music

or Cinema.

• Color Temperature: Select Warm to enhance

warm colors such as red; select Cold to

make picture bluish; select Standard for a

moderate color temperature; select User to

customize values on red, green and blue.

• 2D/3D: Select the input signal's 3D format.

• 2D: Select this when the input signal is

of 2D format. This is the default value.

• 3D side by side: Select this when the

3D input signal is of the side by side

format.

• 3D Top/Bottom: Select this when the

3D input signal is of the top/bottom

format.

Image settings

You can view and change the following image

settings.

• Geometry Corrections: Select an option to

correct the keystone and make the image

rectangular. The default value is Off. Note:

Changing this setting will reset the digital

zoom setting.

• Auto: Let the projector automatically

correct the keystone.

• Manual: Manually correct the keystone

by adjusting the corners of the screen.

• V/H Correction: Manually correct

the keystone by making vertical and

horizontal adjustments.

• Off: Disable auto keystone correction.

• Projection Direction: Adjust the projection

to the correct direction based on how the

projector is installed.

• Digital Zoom: Scale down the projection

image by up to 50%. The default value is

100% (no scale-down). Note: Changing

this setting will set geometry corrections to

Manual.

• Autofocus on startup: Turn this on to let the

projector automatically adjust the focus on

startup. The default values is OFF.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips SCN350 Screeneo U4 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips SCN350 Screeneo U4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info