Bedienungsanleitung Philips SCN450 Screeneo S4 (Seite 20 von 28) (Englisch)

706805

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Change settings 19

• Keystone Correction: Correct keystone

or distorted images to be rectangular or

square.

• Custom Correction: Adjust image shape

according to your need.

• FlowMotion: Switch MEMC (motion

estimation motion compensation) for

motion interpolation to alleviate display

motion blur.

To access color mode

During video play, press on

the remote control, then use the Navigation

buttons and OK to access the color setting and

its options.

• Color: Select a predeﬁned color setting for

picture and video display. This setting is

independent of the brightness mode. The

diﬀerent modes are optimised for different

source content and playback environments:

• Vivid: Improves picture quality in the

presence of high ambient light by

increasing the color saturation.

• Normal: Balanced colors for general

viewing.

• Soft: Improves comfort in dark

environments by reducing picture

brightness.

• Game: Reduces reaction time and turns

off FlowMotion.

• User: In this mode you can

configure your own picture

settings like brightness, contrast,

saturation,sharpness etc.

Sound settings

1 Press .

2 Select Sound, and then press OK to access

the sound options.

3 Use the Navigation buttons and OK to

select and change:

• Audio Output: Select an audio format

for sound output when the projector is

connected through the digital connector

(S/PDIF).

• PCM: The connected audio device

does not support multi-channel

format. Audio is downmixed to two-

channel sound.

• RAW: Select the original audio

output.

• Speaker: Play audio through the

built-in speakers and disable digital

audio output. If the PCM or RAW

option is selected, the built-in

speakers are disabled.

• System Sounds: Turn the system sounds

on or off.

• Bluetooth speakers: Enable or disable

Bluetooth connection when the

projector in standby.

Power control settings

1 Press .

2 Select Power, and then press OK to access

the power control options.

3 Use the Navigation buttons and OK to

select and change:

• Shutdown: Turn off the projector

immediately.

• Timed Shutdown: Select a time option

or customize a period of time so

that the projector turns off after the

specified period.

Restore default settings

1 Press .

2 Use the Navigation buttons and OK to

select Software Update - Factory Reset.

3 Follow the on-screen instructions to start or

cancel resetting.

Notice

After resetting to the default settings,

all the files and apps you installed are

completely erased. Back up your files if

you need to reset the projector.

Clear memory storage

You can clear browsing history (such as

cookies), installation package and system

memory stored on the local storage.

1 Press .

2 Use the Navigation buttons and OK to

select Cleaner.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips SCN450 Screeneo S4 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips SCN450 Screeneo S4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info