Bedienungsanleitung Philips SRU 3005 (Seite 6 von 29) (Englisch, Französisch, Spanisch)

105793

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

1110

Programming Combo Device Codes

Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/

VCR, etc.) will require you to set up two different Mode

buttons to control both parts of the Combo device. For

example, if you have a TV/DVD Combo, you might need

to set up one code under the TV button to control the

TV part AND a separate code (under any other Mode

button) to control the DVD part.

Controlling Combo Devices

Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/

VCR, etc.) have separate buttons on the original remote

to select the part of the Combo device to be controlled.

For example, if your Combo device is a DVD/VCR then

its original remote might have separate DVD and VCR

buttons for selection of the Combo part you would

control. The equivalent button functions can be found

on your Philips remote by using the device Mode and

SETUP buttons.

Referring to “Programming with Code Search” on page

8, setup a device Mode (e.g. DVD) with the correct code

for your Combo device. Assuming the DVD/VCR

Combo device is the example and its code is

programmed under DVD Mode, press and hold the

DVD Mode button for more than one second to send

the DVD button command. To send the VCR button

command, quickly press and release the SETUP button

followed by pressing and releasing the DVD Mode

button. This method can be applied similarly to all

Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.)

and is available for all Modes. Note this feature is not

supported by all codes.

Controlling Devices Requiring Separate Power On and

Off Buttons

Some devices (e.g. certain RCA TVs) require separate

Power On and Power Off buttons to turn the device on

and off. The equivalent button functions can be found

on your Philips remote by using the device Mode and

POWER buttons. Referring to “Programming with Code

Search” on page 8, setup a device Mode (e.g. TV) with

the correct code for your device.

Assuming a TV device is the example and its code is

programmed under TV Mode, to turn your TV on, press

and hold the TV Mode button for more than one

second to transmit the Power On button command.

Setup, cont.

Code Identification Feature

The Code Identification Feature allows you to identify

the 4 digit library code stored under your device key. For

example, if you want to find out what 4 digit code is

stored under your TV device key, follow the six steps

below:

1. Press and hold the SETUP button until the red

indicator stays on. Release the SETUP button.

2. Press and release the desired mode button (TV,

VCR, etc.). The red indicator blinks, then stays lit.

3. Press and release the SETUP button. The red

indicator blinks off.

4. To find the first digit for the code stored under the

mode key pressed in step 2, press each numeric key

from 0-9 in turn. When the red indicator blinks off

the number you pressed is the first digit for the code

you are searching for.

5. To find the second digit, repeat step 4, this time

when the red indicator blinks off this is the second

digit.

6. Repeat step 4 to find the third and fourth digits.

Sleep Timer

The SLEEP button operates the Sleep function of your

device providing it supports the Sleep function.

Alternatively, you can enable the remote to turn off

your TV after a period of 1 to 99 minutes as shown

below. This feature is only available for the TV Mode

and the remote must be in TV Mode to set a Sleep

Timer. This feature works even if your TV does not

have its own Sleep function.

1. Press and release the TV Mode button.

2. Press and hold the SETUP button until the red

indicator stays on. Release the SETUP button.

3. Press and release the SLEEP button (Note any

previously set Sleep timer is cancelled at this point

and the remote returns to normal operation).

4. Press and release the numeric buttons (01-99) for

the time required. The red indicator blinks off to

indicate button press acceptance and remains off

after the second button press.

5. TV Sleep Timer now set.

6. Leave the Remote pointing towards the TV with an

unobstructed path.

To cancel the Sleep Timer, press and release the

POWER button in TV Mode or repeat Steps 1, 2 and 3

above.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips SRU 3005 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips SRU 3005

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info