Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4. Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
Adjusting device selection (Mode-selector) . . . . . . . . . . . . . . . . . . . . . . 8
Adding a remote control function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Restoring the original remote control settings . . . . . . . . . . . . . . . . . . . . 9
5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6. Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . . . 82-91
1. Introduction
Congratulations on your purchase of the Philips SRU540 universal remote
control. After installing the remote control you can operate a maximum of
4 different devices with it:TV, DVD player/recorder, video recorder and SAT
(settop box, satellite or cable decoder).You can find information about how
to prepare this remote control for use in the chapter ‘Installing the remote
control’.
2. Installing the remote control
Inserting the batteries
1 Press the cover inwards and slide it in the
direction of the arrow.
2 Place two AAA type batteries into the
battery compartment, as shown.
3 Slide the cover back and click it firmly into
place.
Note: If the device indicators in the selector window (TV, DVD, SAT and VCR) blink
four times after every key press, the remote control is indicating that its
batteries are running low. Replace the old batteries with two new AAA
batteries.
Testing the remote control
The remote control has been programmed to operate most Philips devices.
Because the SRU540 may use different signals for each brand and even for
different models of the same brand, it is advisable to test whether your
device responds to the SRU540.The example below (TV) instructs you how
to do this.You can repeat the same steps for other devices (DVD
player/recorder, video recorder, etc.) which you want to operate using the
SRU540.
Example of TV:
1 Turn your TV on manually or use the original remote control.
Tune to channel 1.
2 Press the SELECT key to select TV.
Press the key until TV lights up in the selector
window.
If TV does not light up, check whether the
batteries are properly inserted
(see ‘Inserting the batteries’).
4
Instructions for use
English
