4. Extra possibilities
Adjusting device selection (Mode selector)
The SRU740 is default set for operating TV, SAT (settop box, satellite or cable
decoder), DVD (or VCR) and AMP (amplifier).You can select the device you
wish to operate with the SELECT key (mode selector). Each option allows
operation of one device only. If desired, you can program the SELECT key
(mode selector) to select a different kind of device. For example, if you want
to operate a second TV. In the following example you will see how to
configure the SAT mode for a second TV.
1 Switch on the second TV.
2 Press the SELECT key to select SAT.
Press the key until the SAT LED lights up.
3 Then keep keys 1 and 6 on the SRU740
pressed simultaneously for three seconds,
until the SAT LED lights up.
4 Press keys 9, 9 and 2 in that order.
5 Press the SELECT key to select TV.
Press the key until the TV LED lights up.
6 Press the 1 key.
– The SAT LED flashes twice.
SAT will now allow you to operate your
second TV.
7 Program the SRU740 to operate the second TV.
See ‘Setting the remote control’.
Adding a function to the remote control
If you want to add a function to the SRU740, you can contact the
Philips service line for Universal Remote Control to ask for the 5-figure code
for the extra function.
9
Instructions for use
English
