Bedienungsanleitung Philips TAB8507 (Seite 17 von 30) (Englisch)

811262

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

17EN

Return to this app to continue setup.

Ready?

Go To Wi-Fi Settings PlayFiDevice 1234 Your Home Router

Select Name

Select Nam

Wi-Fi Password

Enter the password for the network Your Home Router

1234567890

Show Password.

Your Play-Fi device is connecting to

Your Home Router

When the Wi-Fi light on the device stops

blinking and becomes solid the device is

setup and ready to be used.

Philips SoundSettings

Setup Play-Fi Device

SETUP

Bedroom

Return to this app to continue setup.

Ready?

Go To Wi-Fi Settings PlayFiDevice 1234 Your Home Router

Select Name

Select Nam

Wi-Fi Password

Enter the password for the network Your Home Router

1234567890

Show Password.

Your Play-Fi device is connecting to

Your Home Router

When the Wi-Fi light on the device stops

blinking and becomes solid the device is

setup and ready to be used.

Philips SoundSettings

Setup Play-Fi Device

SETUP

Bedroom

6 After successful Wi-Fi connection, the

Wi-Fi light indicator will stop pulsing

and turn solid. Once you set up this

product on your Wi-Fi network, you

can control it from any smartphone or

tablet on the same network.

7 After connection, you can change

the device name. There are several

names to choose from or create your

own by choosing Custom Name at

the end of the name list. Otherwise,

it follows the default name.

8 After connection, this product may

perform a software update.

Upgrade to the latest software

when it is your rst time set up.

The software upgrade may take

several minutes. Do not unplug your

speaker, turn o your device, or leave

the network during the update.

Note

• After connection, the product may perform

a software update. Upgrade is required after

initial set up. Without the upgrade, not all

product features can be available.

• When the rst time set up is not successful, hold

down the (Wi-Fi) button on the soundbar

for 8 seconds until the second tone can be

heard and the Wi-Fi light is changed to a slow

pulse. Reset the Wi-Fi connection, restart the

app and start the set up again.

• If you want to change from one network to

another, you need to set up the connection

again. Press hold down the (Wi-Fi) button

on the soundbar for 8 seconds to reset the Wi-Fi

connection.

• When the rst time set up is not successful,

please close the Philips Sound app powered by

DTS Play-. Restart the app and try the setup

again.

AirPlay setup

Use AirPlay to set up the Wi-Fi connection

of iOS device (iOS7 or later) and soundbar.

1 iOS device: Settings > Wi-Fi > select

home network【Play- device

(xxxxxx)】

» Go to the Wi-Fi set up. The Play-Fi

device name displays around in 5

seconds.

Settings

» Select the Play-Fi device in the

Airplay set up.

» Press “Done” when set up

complete

Settings

» After successful Wi-Fi connection,

the Wi-Fi light indicator will stop

pulsing and turn solid.

Solid

2 Return to Philips Sound App to name

the device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips TAB8507 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips TAB8507

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info