Bedienungsanleitung Philips VR110 (Seite 12 von 39) (Englisch)

54447

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

— 13 —

Notes:

Auto channel set function takes place first; it assigns automatically all receivable stations in your area.

Auto clock set function sets the clock automatically by reading the clock setting data from a station transmitting a

PDC signal while auto channel set is being performed.

During auto channel set, the VCR recognizes each station name of the detected stations and stores them in the VCR’s

memory, then automatically sets S

HOWVIEW system’s assigned Guide Channel number for those stations according to

the broadcast area.

In the area where to TV station transmits a PDC signal, the VCR can perform neither auto clock set nor auto Guide

Channel number set.

For RF connection users: The VCR detects the channels which are not occupied by local stations and selects one

channel automatically for your Video Channel that is located in the middle of more than 5 vacant channels.

If there is a power cut, or if you press STANDBY/ON, POWER or MENU while Auto Set Up is in progress, Auto Set

Up will be interrupted; be sure to turn off the VCR power once and try again from step 1.

Auto clock may not function properly depending on the reception condition.

IMPORTANT

7 In certain reception conditions, station names may not be stored correctly, and auto Guide Channel Number Set may

not work properly. If the Guide Channel numbers are not set properly, when you timer-record a TV programme using

the S

HOWVIEW system, the VCR will record a TV programme of a different station. When programming the timer

using the S

HOWVIEW system, be sure to check whether the channel position on which your VCR receives the

broadcasting station you wish to record is selected. (✈P.29)

7 Your VCR memorizes all detected stations even if reception of some of them is poor. In these cases picture quality

may be poor. To delete those stations with an unacceptable picture, see page 18.

7 For RF connection users: In certain reception conditions, the Video Channel may not be set correctly and interference

may appear in the TV picture while the VCR’s power is on. Set your Video Channel manually. (✈P.15)

INFORMATION

7 Language for the on-screen display

Language for the on-screen display is automatically set depending on the Country setting you have made in

preparation on page 10 (unless you have selected BELGIUM or SUISSE), as shown below.

SUOMI = SUOMI DANMARK = DANSK NEDERLAND = NEDERLANDS

PORTUGAL = ENGLISH OESTERREICH = DEUTSCH GREECE = ENGLISH

DEUTSCHLAND = DEUTSCH

ESKÁ REPUBLIKA = ENGLISH OTHER WESTERN EUROPE = ENGLISH

POLSKA = ENGLISH ITALIA = ITALIANO OTHER EASTERN EUROPE = ENGLISH

NORGE = NORSK MAGYARORSZÁG = ENGLISH

SVERIGE = SVENSKA ESPAÑA = CASTELLANO

If you want to change the language setting manually, see page 16.

7 Just Clock

Your VCR is equipped with the Just Clock function which provides accurate time keeping through automatic

adjustments at regular intervals, by reading data from a PDC signal. If you want to take advantage of this function,

simply set it to “ON”, on the Clock Set screen. (✈P.20)

ETTING

(CONTINUED)

Untitled-2 16/08/2000, 15:3613

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips VR110 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips VR110

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info