Bedienungsanleitung Philips VR110 (Seite 16 von 39) (Englisch)

54447

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

— 17 —

2Select Channel Position

1 Press 5∞ 23 until a vacant

position in which you want to store a

channel begins blinking.

2 Press OK/STATUS. The Manual

Channel Set screen appears.

3Set New Channel Information

1 Press 5 or ∞ to change the band

between CH (regular) and CC

(cable), then press 3.

2 Press the Number buttons to input

the channel you want to store.

• Input “0” before any single number

entries.

• To input the registered station name

(ID – ✈P.19), press 3 until “----”

(ID setting) begins blinking, then

press 5 or ∞.

• For fine tuning adjustment, press 3

until “+/–” begins blinking, then

press 5 or ∞. While tuning, “+” or

“–” appears.

• When storing a channel that sends

scrambled broadcasts, press 3 until

“OFF” (Decoder setting) blinks,

then press 5 or ∞ to set

“DECODER” to “ON” (“OFF” is

the default setting).

When “A/V2 SELECT” is set to

“A/V” or “SAT”, the “DECODER”

setting cannot be changed (✈P.27).

Auto Channel Setting

If you move to another place, you may

need to tune the VCR tuner again for

your new residential area.

1Perform Auto Channel Set

1 Press VCR.

2 Press MENU.

3 Press 5 or ∞ to select “AUTO

TUNER SET UP”, then press

OK/STATUS.

4 Press 5 or ∞ to select your country’s

name, then press OK/STATUS.

5 Press 5 or ∞ to select your preferred

language, then press OK/STATUS.

6 Press 5 or ∞ to select “AUTO CH.

SET”, then press OK/STATUS. The

Auto Set screen appears as below;

The Auto Set screen appears, and

remains on screen while the recorder

searches for receivable stations.

As Auto Channel Set progresses,

the “

” mark on the screen moves

from left to right.

Wait until the screen as shown in step 2

appears.

Confirm Programmed Channel

Information List

Once it is completed, “AUTO CH. SET

COMPLETED” is displayed on the

screen for about 5 seconds.

The following screen will appear after

5 seconds, or if you press MENU;

PR: channel positions

CH: channel numbers

ID: station names (✈P.19)

• The blueback screen and the

programme currently being broad-

cast by the blinking station

apppear alternately for 8 seconds each.

• To view the next page, use the 5∞

23 buttons on the remote control.

The stations located in the selected

country appear at the top of the list.

• The Guide Program numbers will

also be set automatically during Auto

Channel Set.

3Finish Setting

Press MENU to exit the menu

operations.

Notes:

• If you perform Auto Channel Set when the

aerial cable is not connected properly,

“NO TV SIGNALS” appears on the screen

in step 2. When this happens, make sure of

the aerial connection and press OK/

STATUS; Auto Channel Set will take place

again.

• Depending on reception conditions, the

stations may not be stored in order, and

the station names may not be stored

correctly.

Manual Channel Setting

When you want to do channel setting

manually, perform the following

procedures as required.

• If you want to ..........

.......... add channels (See below)

.......... delete unwanted channels

(See page 18)

.......... change the channel

positions (See page 18)

.......... perform fine-tuning (See

page 18)

.......... descramble programmes

when receiving scrambled

broadcasts (See page 18)

.......... change station names (See

page 18)

• If you live in Eastern Europe, see

INFORMATION on page 18 also.

If you want to add channels

Access Programmed Channel

Information List

1 Press VCR.

2 Press MENU.

3 Press 5 or ∞ to select “ MANUAL

TUNER SET UP”, then press

OK/STATUS.

The blueback screen and the

programme currently being broadcast

by the selected channel appear

alternately for 8 seconds each.

AUTO CH. SET

PLEASE WAIT

0–––––+––––

■

––––+–––––+

END : MENU

Beginning

End

C: Cable

PR CH ID PR CH ID

01 25 ARD 08 C26 E-SP

02 C08 SKY1 09 C33 3SAT

03 10 ZDF 10 55 WEST

04 C65 RAI1 11 C24 SAT1

05 C31 BBC1 12 C23

OSF

06 C32 BBC2 13 C25

ESPN

07 C24 BBC4 14 C48

20G

SELECT : 5

∞

EDIT : OK

ERASE : CLEAR

END : MENU

∞

PR CH ID FINE DECODER

01 CC25

ARTE

+/– OFF

SELECT :

∞

CURSOR POSITION :

CONFIRM : OK

END : MENU

∞

The blueback screen and the

programme currently being broadcast

by the selected channel appear

alternately for 8 seconds each.

(Ex.) To store in position 12.

PR CH ID PR CH ID

01 25 ARD 08 C26 E-SP

02 CDB SKY1 09 55 WEST

03 10 ZDF 10 C24 SAT1

04 C65 RAI1 11 C23 OSF

05 C31 BBC1 12

– –– –

06 C32 BBC2 13

– –– –

07 C33 3SAT 14

– –– –

SELECT: 5

∞

EDIT : OK

ERASE : CLEAR

END : MENU

∞

Untitled-2 16/08/2000, 15:3717

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips VR110 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips VR110

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info