Bedienungsanleitung Philips VR110 (Seite 22 von 39) (Englisch)

54447

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

— 23 —

DVANCED

PERATIONS

• During a still picture:

Press CH 5 /∞ (or PROGRAMME

5 /∞ on the front panel) to reduce

jitter in the still picture.

This is available only for MESECAM

tape.

To cancel manual tracking, stop the

tape, eject the tape, then re-insert it.

Notes:

If you keep pressing

∞

button,

you might get “USE CLEANING

CASSETTE” message on the screen (and

“U:01” on display window). Please

disregard this message and re-adjust the

tracking. However, if the message appears

automatically (without pressing

∞

this indicates that your video heads

are dirty. (

✈

P.39)

Index Search

You can locate an index marked at the

beginning of each recording on a tape

recorded on this VCR (or an indexed

tape).

Press ¢ or 4 repeatedly until the

appropriate number is displayed on the

TV screen before starting play.

Rapid forward or reverse search begins.

When it finds the designated index,

playback starts automatically.

• Locate an index number by pressing

the button repeatedly, indicating how

many index marks ahead of or

behind that recording you want is

from the tape’s current position.

• Up to the ±9th index mark from the

current position on the tape can be

located.

Special Effect Playbacks

Are you familiar with tape playback?

If so, you are ready to enjoy the special

effect playback features described

below.

To skip playback for a certain

period

Press SKIP SEARCH during playback

to search forward for 30 seconds by the

time counter reading.

Each time you press the button, the

search time increases as follows:

30=60=90=120 sec.

The VCR automatically resumes

normal playback after searching for the

specified period.

To view a still picture

Press STILL/SLOW briefly (or

PAUSE/STILL 8 on the front panel)

during playback.

Playback is frozen or stopped and a

still picture appears.

Press the STILL/SLOW

button

repeatedly to advance the still picture

frame by frame.

To advance a still picture:

Press STILL/SLOW

or PAUSE/

STILL 8 again. Each time a button is

pressed, a still picture advance one

frame.

To resume playback, press PLAY 3.

To view a slow motion picture

Press STILL/SLOW (or PAUSE/

STILL 8 on the front panel) for more

than 2 seconds during playback.

To decrease the slow motion speed

(and reverse the slow motion

playback), press STILL/SLOW –.

To increase the slow motion speed

(and forward the slow motion

playback), press STILL/SLOW +.

To resume playback, press PLAY 3.

Notes:

• No sound comes out during special effect

playbacks.

• If you keep viewing slow motion and still

pictures for more than 5 minutes, the VCR

automatically stops to protect the tape

and video heads.

• During special effect playbacks, some

noise bars will appear on the TV screen.

To rapidly locate, then freeze,

a particular scene

During tape playback or Still mode,

follow these steps.

1 Press JOG/SHTL so that the

JOG/SHTL button lights.

2 Turn and hold the Shuttle ring

clockwise (or counterclockwise) to

fast forward (or reverse) a picture.

As you turn the ring further, the

search speed increases. You may

only use the Shuttle ring when the

JOG/SHTL button is lit.

3 Releasing the Shuttle ring freezes the

picture in still mode.

Notes:

• No sound comes out during special effect

playbacks.

• If you keep viewing slow motion and still

pictures for 5 minutes, the VCR

automatically stops to protect the tape

and video heads.

• During special effect playbacks, some

noise bars will appear on the TV screen.

• When normal playback resumes from

search, still, slow motion or frame-by-

frame playback, the picture may jitter

vertically momentarily depending on the

type of TV being used.

• When using the jog dial or shuttle ring on

the front panel, you do not have to press

JOG/SHTL on the remote control.

Tracking Adjustments

Auto tracking

Each time a tape is inserted, auto tracking

starts working and continuously analyses

the signal to adjust for optimum picture

quality during playback. So, there is no

need for you to minimize noises in most

tapes during playback.

Manual tracking

• During normal playback:

If auto tracking cannot eliminate noises

well during playback, press CH 5 /∞

(or PROGRAMME 5 /∞ on the front

panel).

• During a slow motion picture:

Press CH 5 /∞ (or PROGRAMME

5 /∞ on the front panel) to mini-

mize noises in the slow motion

picture.

Untitled-2 16/08/2000, 15:3823

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips VR110 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips VR110

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info