Bedienungsanleitung Philips wacs4500 (Seite 46 von 53) (Englisch, Holländisch)

160293

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

English

11. Gracenote CD Information

The Gracenote music recognition service enables

the set to look up CD track information

(including album, artist, genre, track information)

from its built-in database. It allows the recorded

CD tracks to be properly categorized (for

example, under Artists,Albums, Genres or All

tracks) and also be merged with the existing

tracks in the hard disk.

11.1 Gracenote music

recognition database

A 800 MB CD database (contains 800,000 most

popular CDs) is embedded in every WACS4500

Center for quick look-up on track information.

An update ﬁle that contains newly released CDs

is available quarterly on www.club.philips.com for

download.

11.1.1 To update Gracenote music

recognition database

1 Use your PC to register your product on

www.club.philips.com and go to "Show Upgrades

& Support" page to download Gracenote Music

recognition database update. Note that the

updates are posted quarterly and each update is

independent of each other, i.e. a later update

could be installed without an earlier update.

2 After storing the ﬁle on your PC, you can either

burn a CD with the update ﬁle using your

favorite CD burning software and drop the CD

into the WACS4500 Center for automatic

update, or you can use WADM's Gracenote

update option if you have connected your PC to

WACS4500 Center.

11.2 Gracenote Internet Query

If the CD track information of your new CD disc

cannot be displayed on the WACS4500, the

quickest and surest solution is to look it up from

the internet by following steps below.

11.2.1 Connecting to the Internet

1 Check that you have connected the Center to an

Access Point or Router with Internet access or

connect the Center to an ADSL modem with

internet access directly

Helpful hint:

– Make sure that no dial-up, user name or

password is required for the Internet access.

2 Set DNS and Gateway

● If you are using a DHCP* enabled Access

Point, Router or ADSL modem, the DNS and

Gateway can be got automatically, so you need

only to set the Center to Automatic (DHCP)

mode by following steps below:

*DHCP stands for Dynamic Host Conﬁguration Protocol. It is a

protocol for assigning dynamic IP addresses to devices on a network.

a. Press MENU

b. Press 3 or 4 and 2 to select Settings

➛Network ➛ Wired

c. Press 2 to continue

d. Press 3 or 4 and 2 to select Automatic

(DHCP).

● If there is no DHCP, set the DNS and Gateway

manually by following steps below:

On your PC, carry out the following steps:

a. Click Start > Run

b. Type cmd and click OK

c. Type ipconﬁg/all

ETHERNET

Wireless Base Station 11g T

rue T

urbo

Wireless

Modem PC

Power

Internet

for illustration only

External wired network

DSL modem

Router

pg001-pg051_WACS4500_Eng 2006.11.29 15:49 Page 46

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips wacs4500 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info