Bedienungsanleitung Philips wacs4500 (Seite 49 von 53) (Englisch, Holländisch)

160293

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

English

WARNING

Never try to repair the system yourself as this will invalidate the warranty. Do not open the

system as there is a risk of electric shock.

If a fault occurs, ﬁrst check the points listed below before taking the system for repair. If you are

unable to resolve a problem by following these hints, consult your dealer or Philips for help.

Problem Solution

13.Troubleshooting

During the ﬁrst-time setup, the display

on the Station shows “Searching for

Center”.

I get interference on my wireless (Wi-Fi)

link between the Center and Station.

The WACS4500 operates in the 2.4GHz radio

frequency spectrum. Many other household/IT

devices also operate in this frequency spectrum,

for example: microwave ovens, Dect phones,

bluetooth devices like bluetooth headphones,

computer mouse, wireless routers, cordless

phones,Wi-Fi compatible printers, PDAs.These

devices can interfere with the Wi-Fi link

between the Center and Station, resulting in

interference such as pause during playback, slow

response to your operation, etc.The severity of

interference varies depending on the extent of

radiation from the device and the strength of

Wi-Fi signals in that position.

✔ Check that you have placed the Center and

Station side by side on a ﬂat and ﬁrm surface.

✔ Check that you have connected the Center to

the power supply.

✔ When adding a new station, check that the

center is in Installation mode (see Network

setting: Adding Additional Station to the Wi-Fi

network on the Center).

✔ Tu rn off the wireless Access Point nearby if you

encounter difﬁculty connecting the Center and

Station.

If you are playing the set, stop playback and

take the appropriate measures as follows:

✔ Keep the Center or Station at least 3 meters

away from such devices.

✔ Use the WEP/WPA key when connecting the

Center and Station to an existing wireless PC

network.To set WEP/WPA key, connect

Center/Station to your PC using Philips

Wireless Audio Device Manager (WADM) in

the by-packed PC Suite CD. In WADM’s

Device conﬁguration, enter the Wireless

Network sub-menu, and in Device Wireless

Authentication Type, select WEP or WPA.

✔ Change the operating channel of the Center

and Station when connecting them to an

existing wireless PC network.To change

channels, connect the Center/Station to your

PC using Philips Wireless Audio Device

Manager (WADM) in the by-packed PC Suite

CD. In WADM’s Device conﬁguration, enter

the SSID of your Wireless Network, and select

Ad-hoc mode. See the manual Connect to

your PC and the WADM help ﬁle.

✔ If possible, change the operating channels of

the other Wi-Fi devices at your home.

✔ Tu rn the devices in different directions to

minimize interference.

pg001-pg051_WACS4500_Eng 2006.11.29 15:49 Page 49

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips wacs4500 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info