Bedienungsanleitung Phonocar VM489 (Seite 8 von 16) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

698638

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

1) Camera image.

2) Recordings made.

3) W-FI Red = camera in connection.

WI-FI Green = connected camera.

4) Return to the previous screen.

5) Delete records.

6) HOTSPOT SETTING: It is possible

to customize USER and PASSWORD

WARNING: The Apple device must be renamed. Enter your smartphone settings then select “General” and then

“Info”. Press “name” and change the name to: Rear Wifi Camera. In the settings select PERSONAL HOTSPOT,

activate it and enter the wi-fi password: 12345678.

Then, you can customize USER and PASSWORD, through

the HOTSPOT SETTING.

Note: Remember to save your SSID and PASSWORD settings because you cannot reset the system (RESET)

or change the settings without re-entering the previously stored SSID and PASSWORD.

APP iOS

APP STORE: “PHONOCAR WI FI REAR CAMERA”

EVENT  HOTSPOT CAMERA FUNCTION

 Timer Activation and switch on of the camera router  

Opening PHONOCAR APP  The smartphone connects to the camera.

 The WI-FI function is deactivated (if it was active).

Ignition-key activation If the connection is not yet active, the device

continues the research. If, instead, it is already connected it waits for

the engagement of the reverse gear (the APP must ALWAYS remain

open to receive images. )

Reverse gear Engagement The camera sends the image to smartphone. 

 At the same time static guidelines will be displayed.

PHONOCAR APP in background  The smartphone keeps HOTSPOT active but to receive the rear image,

it is necessary to reopen the APP, when the reverse gear is re-activated.

PHONOCAR APP closed  By completely closing the APP on your smartphone, it

continues to remain connected via HOTSPOT, and when the APP

reopens the smartphone will be ready to receive the images.

PHONOCAR APP reopened The smartphone remains in “ready to reverse gear”.

The WI-FI function is deactivated (if activated).

OUT FROM THE VEHICLE  The system remains on for 60 minutes after having closed the

ignition-key , so as to maintain the possibility to connect your

smartphone if it is within range of the camera (approx. 10 meters).

In this way, activation times of the system are reduced.

After 60 minutes, the system switches off.

WI-FI AND HOTSPOT CONNECTIONS

The HOTSPOT function cannot be used at the same time as the WI-FI because the smartphone is supposed to

create the connection with the camera. It will therefore not be possible to connect to any Access Point, Router or

other WI-FI device during the use of the rear camera, but 3G for data transmission will remain in operation.

APP APPLE: PHONOCAR WI-FI REAR CAMERA

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Phonocar VM489 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info