643480
31
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
STARTUP
Action Description Display
Hold the ON/OFF key
down for several
seconds
CONTROL
12:00 73F
START
PHASE I
1 2:00 73F
START
PHASE II
12:00 73F
1
1
1
A cycle starts with three phases which take the stove into the normal
operating mode:
CONTROL (rst 20 seconds)
The lighter (glow plug) activates.
CONTROL
12:00 73F
START
PHASE I
1 2:00 73F
START
PHASE II
12:00 73F
1
1
1
START PHASE I
The extractor fan starts up.
The fuel-loading auger is activated and starts to feed pellets into the
grate.
CONTROL
12:00 73F
START
PHASE I
1 2:00 73F
START
PHASE II
12:00 73F
1
1
1
START PHASE II
If the lighter has triggered the combustion process, the fuel-loading auger
increases to allow a period of stabilisation and correct combustion of the pellets
in the subsequent normal operating mode.
If during the startup phase the sensor on the ue gas outlet shows a rise in
temperature (sign that the combustion process is underway), the stove is
considered to be lit and goes into the normal operating mode.
DT2040051-07
CONTROL
12:00 73F
START
PHASE I
1 2:00 73F
START
PHASE II
12:00 73F
1
1
1
Action Description Display
Once the startup cycle has been completed successfully the stove
stabilises in the normal operating mode.
The power, fan speed and room temperature may be adjusted during
normal operation.
Shown is an example of the INITIAL DISPLAY in normal operation.
LEVEL
P2
12:0073F
1
Press the
POWER
key and
LEVEL
P2
12:0073F
SET
POWER
P3
SET
VENT-1
02
SET ROOM
TEMPERAT.
79F
CLEANING
GRATE
12:00 79F
1
1
1
1
1
MAX VENT
1
FLUE COOL
12:00 79F
select
LEVEL
P2
12:0073F
SET
POWER
P3
SET
VENT-1
02
SET ROOM
TEMPERAT.
79F
CLEANING
GRATE
12:00 79F
1
1
1
1
1
MAX VENT
1
FLUE COOL
12:00 79F
POWER
To adjust the power, press the POWER key and select the desired setting
by pressing the SELECT key.
After the desired setting has been selected the remote control returns to
the INITIAL DISPLAY.
LEVEL
P2
12:0073F
SET
POWER
P3
SET
VENT-1
02
SET ROOM
TEMPERAT.
79F
CLEANING
GRATE
12:00 79F
1
1
1
1
1
MAX VENT
1
FLUE COOL
12:00 79F
NORMAL OPERATION
H07031310 / DT2002112 – 00
31
English
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

piazzetta-p958-d

Suche zurücksetzen

  • ist es möglich die Daten zu ändern so das auf stufe eins nur minimal pelletts verbraucht werden ? Eingereicht am 1-12-2018 17:45

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Piazzetta P958 D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info