643482
33
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
Description of activity Display
The user attempts to restart the stove during the shutdown stage when the stove
is still hot by pressing the ON/OFF key for a few moments.
If the readout “WAIT FOR START UP” appears on the display by pressing the ON/OFF
key for a few moments, it means that the stove is still hot and it is necessary to wait
for it to cool.
The new ignition cycle will be inhibited until the stove ends the cooling phase.
After waiting for a few minutes the user can restart the stove and a new ignition cycle
will start automatically from the control stage.
WAIT FOR START UP
WAIT FOR START UP
DT2040123-00
Description of activity Display
Once the stove is properly lit, it will stabilise in the normal mode of operation.
The power setting appears on the display: P1, P2, P3, P4, P5.
The time or the room temperature appears on the display. (See paragraph DISPLAY
MODE”).
The power and the room temperature settings may be adjusted during normal
operation.
12:50 P2
POWER
To change the power setting, press key 6.
The scrolling readout SET POWER appears on the display.
Use key 5 or 6 to select the required power level, which will appear on the display.
The display automatically returns to its initial status.
P2 SET POWER
ROOM TEMPERATURE
To change the temperature setting, press the SET key. The scrolling readout SET ROOM
TEMP appears on the display.
Use key 1 or 2 to select the required temperature from a scale between 44°F and 86°F
(7°C and 30°C), which will appear in the left display.
The display automatically returns to its initial status.
25° SET ROOM
TEMP
When the desired temperature has been reached the readout OK appears in the
initial display and the stove operates at minimum power even if the display shows
the originally set power level. The temperature can be read by the stove or by an
external thermostat. To choose whether the stove or the external thermostat will read
the temperature see the paragraph EXTERNAL THERMOSTAT”.
If using an external thermostat the readout “TON” appears in the display and the
readings from the stove are cut out.
14:15 OK P2
Automatic grate cleaning is activated during regular stove operation at programmed
intervals that are set by Superior personnel. This procedure is necessary in order
to eliminate accumulation of ash or encrustation that would prevent correct stove
operation and must therefore be removed.
16:30 CLEANING
GRATE
If the temperature rises above a xed value during normal stove operation at maximum
power, the fan motor operates at maximum speed and the stove runs at reduced heat
input for a few minutes to help disperse the heat and prevent the appliance from
possibly overheating.
16:50 MAX VENT
FLUE COOL
NORMAL OPERATION
DT2011662-00
H07029330 / DT2001081 – 02
33
English
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Piazzetta SABRINA wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info