643482
36
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
Description of activity Display
Located on the pellet hopper, its function is to prevent excessive temperature ranges.
If the pellet hopper temperature reaches critical levels, the thermostat cuts off the
power supply to the fuel-loading auger, thereby stopping the supply of pellets to the
grate and starting the stove shutdown process.
- The readout ‘ALC’ appears in the STOVE STATUS mode.
- After approx. 60 seconds the alarm sounds (if activated).
TANK TEMP SAFETY
WHAT TO DO:
- Shut down the stove by holding the ON/OFF key down for several seconds.
- The alarm will stop.
- Wait until combustion of any pellets remaining in the grate has nished.
- After having cleaned the grate, restart the stove by pressing the ON/OFF key. (The
readout TANK TEMP SAFETY must no longer appear on the display. If this is not the
case repeat the process described above.)
Description of activity Display
Its function is to check correct operation of the ue gas fan so that the stove can be
used in all safety.
If the black-red-white cable connected to the ue gas fan (see the paragraph WIRING
DIAGRAM”) momentarily or accidentally removed from its normal position, or is not
connected properly to the electronic board, or the speed of the smoke fan is greater or
lower than the set value according to settings smoke parameter, the readout ALF 3
or “ALF 4 will appear in STOVE STATUS MODE.
- The readout “SMOKE FAN FAILURE appears on the display.
- After approx. 60 seconds the alarm sounds (if activated).
SMOKE FAN FAILURE
WHAT TO DO:
- Shut down the stove by holding the ON/OFF key down for several seconds.
- The alarm stops.
- Call the After-Sales Service Centre.
PELLET HOPPER HOUSING TEMPERATURE
DT2010995-00
FLUE GAS FAN RUNNING
DT2012666-00
Description of activity Display
Its function is to check correct operation of the pressure switch so that the stove can
be used in all safety.
It activates during the “START” stage of the stove (see “STARTING THE STOVE” table).
If an anomaly is detected in the pressure switch, the readout ALF 2” appears in the
STOVE STATUS mode.
The readout “SAFETY SMOKE appears on the display.
After approx. 60 seconds the alarm sounds (if activated).
SAFETY SMOKE
WHAT TO DO:
- Shut down the stove by holding the ON/OFF key down for several seconds.
- The alarm stops.
- Call the After-Sales Service Centre.
H07029330 / DT2001081 – 02
36
English
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Piazzetta SABRINA wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info