699650
18
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
18
Basic Operations
LOUDNESS
When the LOUDNESS function is on, the bass and treble
are emphasized to enable powerful playback audio even at
low volumes.
0 This cannot be set when DIRECT (p17) is on (default
value). Press DIRECT to turn the DIRECT indicator off
before operating. Note that the LOUDNESS setting
reverts to the previous setting when the DIRECT function
is turned off.
1. Press LOUDNESS on the main unit or the remote
controller to switch on or off. The LOUDNESS indicator
lights when on.
BASS (main unit only)
0 This cannot be set when DIRECT (p17) is on (default
value). Press DIRECT to turn the DIRECT indicator off
before operating.
1. Turn the BASS -/+ controller to enhance or moderate the
bass.
TREBLE (main unit only)
0 This cannot be set when DIRECT (p17) is on (default
value). Press DIRECT to turn the DIRECT indicator off
before operating.
1. Turn the TREBLE -/+ controller to enhance or moderate
the treble.
BALANCE (main unit only)
1. Turn the BALANCE L/R controller on the main unit to
adjust the balance of the sounds output from the left and
right speakers.
Perform the following operations to switch the unit to power
amplifier mode to use this unit as a power amplifier when
you have connected a pre-amplifier to the P.AMP DIRECT
jack on this unit (p13).
0 Power amplifier modes settings are not available if
headphones are connected.
1. Press and hold P.AMP DIRECT until the "DIRECT",
"SPEAKERS", and "P.AMP DIRECT" indicators light on
the main unit. Press and hold P.AMP DIRECT to cancel
the power amplifier mode.
Note that the power amplifier mode is not canceled even
if this unit goes to standby mode.
0 When you cancel the power amplifier mode, BASS,
TREBLE, BALANCE, DIRECT, and LOUDNESS revert to
the settings prior to changing to the power amplifier
mode.
0 There is no audio output from the PHONES jack and
LINE OUT jacks while the power amplifier mode is
engaged. The following functions are also unavailable
while the power amplifier mode is on.
Adjusting the sound quality and
balance
1
LOUDNESS
Switching the unit to power
amplifier mode
1
3"
SN29403415_A-40AE_En_1804XX.book 18 ページ 2018年5月23日 水曜日 午後3時19
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pioneer A-40AE wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Pioneer A-40AE

Pioneer A-40AE Bedienungsanleitung - Deutsch, Holländisch, Italienisch, Schwedisch - 96 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info