Bedienungsanleitung Pioneer AVH-280BT (Seite 26 von 45) (Englisch)

649351

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

Boosting the bass

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Bass Booster].

3 Touch to select the bass boost level from 0 to

+6.

Setting the high pass lter

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [High Pass Filter].

3 Touch the item.

The following items are available:

Off(default), 50Hz, 63Hz, 80Hz, 100Hz, 125Hz.

Using the equalizer

Recalling equalizer curves

There are seven stored equalizer curves that you can easily recall

at any time. Here is a list of the equalizer curves:



S.Bass is a curve in which only low-pitched sound is boosted.

 Powerful is a curve in which low- and high-pitched sounds

are boosted.



Natural is a curve in which low- and high-pitched sounds

are slightly boosted.



Vocal is a curve in which the midrange, which is the human

vocal range, is boosted.



Flat is a flat curve in which nothing is boosted.

 Custom1 is an adjusted equalizer curve that you create. If

you select this curve, the effect is applied to all AV sources.



Custom2 is an adjusted equalizer curve that you create. If

you select this curve, the effect is applied to all AV sources.

The default setting is “Powerful”.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Graphic EQ].

3 Touch the equalizer you want.

Displaying the “Audio” setting

screen

1 Press .

2 Touch

, and then .

The “Audio” setting screen appears.

Using fader/balance adjustment

p This function is available when “Rear Speaker Output” is

set to “Full”, and “Preout” is set to “Rear”.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Fader/Balance].

3 Touch

or to adjust the front/rear speaker

balance.

4 Touch

or to adjust the left/right speaker

balance.

p “Front15” to “Rear15” is displayed as the front/rear speaker

balance moves from the front to rear.

“Left15” to “Right15” is displayed as the left/right speaker

balance moves from the left to right.

The default setting is “F/R 0 L/R 0”.

 You can also set the fader/balance by touching

the point on the displayed table.

Using balance adjustment

p This function is available when “Rear Speaker Output” and

“Preout” are set to “Subwoofer Settings”.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Balance].

3 Touch

or to adjust the left/right speaker

balance.

p “Left15” to “Right15” is displayed as the left/right speaker

balance moves from the left to right.

The default setting is “L/R 0”.

 You can also set the balance by touching the point

on the displayed table.

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of

each source to prevent radical changes in volume when switch-

ing between sources.

Settings are based on the FM tuner volume level, which

remains unchanged.

p This function is not available when the FM tuner is selected

as the AV source.

1 Compare the FM tuner volume level with the

level of the source you want to adjust.

2 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

3 Touch [Source Level Adjuster].

4 Touch

or to adjust the source volume.

p If you directly touch the area where the cursor can be moved,

the SLA setting will be changed to the value of the touched

point.

“+4” to “–4” is displayed as the source volume is increased

or decreased.

The default setting is “0”.

Adjusting loudness

This function compensates for deficiencies in the low-frequency

and high-frequency ranges at low volume.

This function is not available while you make or receive a call

using the hands-free function.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Loudness].

3 Touch the item.

The following items are available:

Off (default), Low, Mid, High.

Using the subwoofer output

This product is equipped with a subwoofer output mechanism,

which can be turned on or off.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Subwoofer] to switch “On” (default) or

“Off”.

Adjusting the subwoofer

settings

p This function is available only when “Subwoofer” is “On”.

 Using the subwoofer output on page 26

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Subwoofer Settings].

3 Touch

or to turn the subwoofer phase

to normal or reverse.

4 Touch

or to adjust the subwoofer level

between -24 and 6.

5 Touch

or to adjust the subwoofer

frequency.

The following items are available:

80Hz(default), 50Hz, 63Hz, 80Hz, 100Hz, 125Hz.

Switching the rear speaker

output

1 Turn the source off.

2 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

3 Touch [Rear Speaker Output].

4 Touch to switch “Full” (default) or

“Subwoofer”.

 When this function is set to “Subwoofer

Settings”, “Preout” is fixed to “Subwoofer

Settings”.

Switching the RCA rear output

When “Rear Speaker Output” is set to “Subwoofer Settings”,

this setting is fixed to “Subwoofer Settings”.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 26

2 Touch [Preout] to switch “Subwoofer

Settings”(default) or “Rear”.

Audio adjustments

26 < QRD3356-A >< QRD3356-A >

Audio adjustments Audio adjustments

Pioneer AVH-280BT Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-280BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info