Bedienungsanleitung Pioneer AVH-3200BT (Seite 49 von 96) (Englisch)

454798

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Digital Signal Processor

Introduction of DSP adjustments

(AVH-P4200DVD only)

You can use this unit to control a DEQ-P6600

multi-channel processor (sold separately).

By carrying out the following settings/adjust-

ments in the order shown, you can effortlessly

create a finely-tuned sound field.

1 Setting the speaker setting

2 Using the position selector

3 Auto TA and EQ (auto-time alignment and auto-

equalizing)

4 Adjusting time alignment

5 Adjusting the speaker output levels using a

test tone

6 Selecting a cross-over frequency

7 Adjusting the speaker output levels

8 Adjusting the 3-band parametric equalizer

Notes

! You cannot use the audio functions when

playing discs recorded at a sampling fre-

quency higher than 96 kHz. The equalizer

curve setting, Position, Auto EQ and

Auto TA will also be canceled.

! Sound is only emitted from front speakers

when playing discs recorded at a sampling

frequency higher than 96 kHz.

! When selecting FM as the source, you cannot

switch to Source Level Adjuster.

! You can only switch to

Dynamic Range Control when you are play-

ing DVD discs.

! You can only switch to Time Alignment when

either Front-L or Front-R is selected in

Position.

! When the speaker setting for both the center

and rear speakers are set to OFF, you cannot

switch to Dolby Pro Logic II.

! When the multi-channel processor (DEQ-

P6600) is connected to this unit, you cannot

use MUTE function.

Using the position selector

One way to assure a more natural sound is to

optimize the stereo image and place you right

in the center of the sound field. With the posi-

tion selector function, you can automatically

adjust the speaker output levels and insert a

delay time to match the number and position

of the occupied seats. When used in conjunc-

tion with the SFC, this feature will make the

sound image more natural and offer a panora-

mic sound that envelops you.

1 Display the DSP function menu.

Refer to Introduction of menu operations on

page 45.

2 Touch Position on the DSP function

menu.

3 Touch c/d/a/b to select a listening po-

sition.

Key Display Position

c Front-L Left front seat

d Front-R Right front seat

a Front Front seats

b All All seats

# To cancel the selected position, touch the

same key again.

Note

When adjustments are made to the listening po-

sition, the speaker outputs are automatically set

to the appropriate levels. To tailor the levels more

precisely, refer to Adjusting the speaker output le-

vels using a test tone on page 54 or Adjusting the

speaker output levels on page 53.

Using fader/balance adjustment

You can change the fader/balance setting to

provide an ideal listening environment for all

of the occupied seats.

Section

Menu operations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-3200BT Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-3200BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info