Bedienungsanleitung Pioneer AVH-5200DVD (Seite 37 von 80) (Englisch)

454821

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

# The PIN code is set to 0000 as the default, but

can be changed. Refer to Entering PIN code for

Bluetooth wireless connection on the next page.

# When establishing connection, the icon is dis-

played.

Touch the icon to disconnect the device.

Disconnecting a Bluetooth device.

# If you want to delete a paired Bluetooth tele-

phone, display Delete OK?. Touch Yes to delete

the device.

Deleting a paired device.

# Never turn the unit off while the paired Blue-

tooth telephone is being deleted.

Using a Bluetooth device to

pair

(Function of AVH-5200BT)

If you cannot open the connection between

your Bluetooth device and this unit from your

Bluetooth device, you can use this function to

establish a connection.

1 Display the Bluetooth Connection

Menu.

Refer to Introduction of Bluetooth telephone op-

erations on page 23.

2 Touch Special Device to select the spe-

cial device.

# Bluetooth devices that are difficult to establish

a connection with are called special devices. If

your Bluetooth device is listed as a special device,

select the appropriate one.

3 Touch the special device list to open the

connection.

This unit is now on standby for a connection

with the Bluetooth device.

# If five devices are already paired,

Memory Full is displayed and pairing cannot be

performed. In such cases, delete a paired device

first. Refer to Deleting a paired device. on this

page.

4 Use your Bluetooth device to establish

a connection.

The connection method is different depending

on the Bluetooth device. Refer to the manual

for your Bluetooth device to establish a con-

nection.

While connecting, Pair your phone is dis-

played. If the connection is established,

Paired is displayed.

# If the connection fails, Error is displayed. In

such cases, try again from the beginning.

# The PIN code is set to 0000 as the default, but

can be changed. Refer to Entering PIN code for

Bluetooth wireless connection on the next

page.

Connecting to a Bluetooth

device automatically

(Function of AVH-5200BT)

If this function is set to on, a connection be-

tween your Bluetooth device and this unit will

take place automatically as soon as the two

devices are less than a few meters apart.

Initially, this function is set to on.

1 Display the Bluetooth Connection

Menu.

Refer to Introduction of Bluetooth telephone op-

erations on page 23.

2 Touch Auto Connect to turn automatic

connection on.

If your Bluetooth device is ready for a Blue-

tooth wireless connection, a connection to

this unit will automatically be established.

# To turn automatic connection off, touch

Auto Connect again.

3 Turn your vehicle's ACC switch off and

on.

Switching visible unit

(Function of AVH-5200BT)

Section

Detailed instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-5200DVD Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-5200DVD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info