Bedienungsanleitung Pioneer AVH-P3200BT (Seite 2 von 8) (Englisch)

649356

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Connecting the power cord

Navigation unit can

be connected

(AVIC-F220 (sold

separately)).

Please contact your dealer to

inquire about the

connectable navigation unit.

Notes:

· Change the initial setting of this unit (refer to the Operation Manual). The

subwoofer output of this unit is monaural.

· When using a subwoofer of 70 W (2 Ω) , be sure to connect with V

iolet and

Violet/black leads of this unit. Do not connect anything to Green and

Green/black leads.

Connection method

1. Clamp

the lead.

2. Clamp

firmly with

needle-nosed pliers.

Note:

· The position of the parking brake switch depends on the vehicle model. For details,

consult the vehicle Owner’s Manual or dealer.

Yellow/black

If you use an equipment with Mute function

, wire this lead to

the Audio Mute lead on that equipment. If not, keep the Audio

Mute lead free of any connections.

Light green

Used to detect the ON/OFF status of the parking brake. This lead

must be connected to the power supply side of the parking brake

switch.

Blue/white

Connect to system control terminal of the power

amp (max. 300 mA 12 V DC).

Blue/white (6*)

Connect to auto

-antenna relay control terminal

(max. 300 mA 12 V DC).

The pin position of the ISO

connector will differ depending on

the type of vehicle. Connect 5* and

6* when P

in 5 is an antenna control

type. In another type of vehicle,

never connect 5* and 6*.

Blue/white (5*)

Ground side

ower supply side

Parking brake

switch

Speaker leads

White: F

ront lef

t 

White/black: Front left 

Gray: Front right 

Gray/black: Front right 

Green: Rear left  or subwoofer 

Green/black: Rear left  or subwoofer 

Violet: Rear right  or subwoofer 

Violet/black: Rear right  or subwoofer 

ISO connector

Note:

In some vehicles, the ISO connector may be divided into

two

. In this case, be sure to connect to both connectors.

When you connect the separately sold

multi-channel processor (DEQ-P6600) to this

unit, do not connect anything to the speaker

leads and system remote control (blue/white).

Note:

Depending on the kind of vehicle,

the function of 2* and 4* may be

different. In this case, be sure to

connect 1* to 4* and 3* to 2*.

ellow (2*)

Back-up

(or accessory)

ellow (1*)

Connect to the constant 12 V

supply terminal.

Connect leads of the same

color to each other.

Fuse resistor

Red (4*)

Accessory

(or back-up)

Red (3*)

Connect to terminal controlled by

ignition switch (12 V DC).

Black (chassis ground)

Connect to a clean, paint-free metal location.

This product

(AVH-

P4200DVD

only)

Microphone input (AVH-P3200BT)

Microphone

(AVH-P3200BT only)

Antenna input

Fuse resistor

Orange/white

Connect to lighting switch terminal.

Fuse resistor

Violet/white

Of the two lead wires connected to the back lamp, connect the one

in which the voltage changes when the gear shift is in the

REVERSE (R) position. This connection enables the unit to

sense whether the car is moving forwards or backwards.

4 m

Fuse (10 A)

AUX jack (3.5 ø) (AVH-P4200DVD)

Use a mini plug cable to connect with auxiliary device.

RGB input

Wired remote

input

Hard-wired

remote control

adaptor can be

connected (sold

separately).

Insert the 26 pin cable in the

direction indicated in the figure.

26 pin cable (Supplied with Navigation unit)

Connecting the system (AVH-P4200DVD only)

This product

IP-BUS cable

(Supplied with Bluetooth adapter)

Black

1.5 m

Bluetooth adapter

(e.g. CD-BTB200)

(sold separately)

Microphone

for hands-free phoning

(supplied with Bluetooth adapter)

IP-BUS input

Wired remote input

Hard-wired remote control

adaptor can be connected

(sold separately).

When connecting with supplied USB cable (AVH-P4200DVD

only)

1.5 m

USB cable

(supplied with this unit)

Connect to sparately sold

USB device.

IP-BUS cable

(Supplied with Bluetooth adapter)

Black

Bluetooth adapter

(e.g. CD-BTB200)

(sold separately)

Microphone

for hands-free phoning

(supplied with Bluetooth adapter)

1.5 m

This product

IP-BUS input

Wired remote input

Hard-wired remote control

adaptor can be connected

(sold separately).

When connecting with optional CD-IU200V cable (AVH-

P4200DVD only)

This product

Wired remote input

Hard-wired remote control adaptor

can be connected (sold separately).

iPod with video capabilities

(sold separately)

IP-BUS cable

(Supplied with Bluetooth adapter)

Black

Bluetooth adapter

(e.g. CD-BTB200)

(sold separately)

Microphone

for hands-free phoning

(supplied with Bluetooth adapter)

1.5 m

IP-BUS input

USB input

AUX input (AUX)

Dock connector

Interface cable

(CD-IU200V) (sold separately)

1.5 m

USB cable

Connecting the units Connecting the units Connecting the units Connecting the units

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-P3200BT Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-P3200BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info