Bedienungsanleitung Pioneer AVH-P4300DVD (Seite 55 von 96) (Englisch)

454802

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

2 Touch Parametric EQ.

3 Touch a or b to select the desired item.

EQ (equalizer)—SP-Select (speakers)—Band

(bands)—Frequency (center frequency)—

Level (equalizer level)—Q. Factor (Q factor)

4 Touch d to select the equalizer.

Powerful—Natural—Vocal—Flat— Custom1

—Custom2—Super Bass

5 Touch b and then touch c or d to se-

lect the speaker to be adjusted.

Rear (rear speakers)—Center (center speaker)

—Front (front speakers)

# Speakers with the size set to Off cannot be se-

lected. (Refer to Setting the speaker setting on

page 51.)

6 Touch b and then touch c or d to se-

lect the equalizer band to be adjusted.

Low (low)—Mid (mid)—High (high)

7 Touch b and then touch c or d to se-

lect the center frequency of selected band.

40Hz—50Hz—63Hz—80Hz—100Hz—125Hz

—160Hz—200Hz—250Hz—315Hz—400Hz

—500Hz—630Hz—800Hz—1kHz—1.25kHz

—1.6kHz—2kHz—2.5kHz—3.15kHz—4kHz

—5kHz—6.3kHz—8kHz—10kHz—12.5kHz

8 Touch b and then touch c or d to ad-

just the equalizer level.

Range: +12 to –12

9 Touch b and then touch c or d to se-

lect the desired Q factor.

Narrow (narrow)—Wide (wide)

# Adjust the parameters of each band for the

other speakers in the same way.

Note

A center frequency can be selected for each

band and can be changed in 1/3-octave steps.

However, the interval between the selected center

frequencies cannot be shorter than 1 octave.

Using the auto-equalizer

The auto-equalizer is the equalizer curve cre-

ated by auto TA and EQ (refer to Auto TA and

EQ (auto-time alignment and auto-equalizing)

on this page) on this page).

You can turn the auto-equalizer on or off.

1 Display the DSP function menu.

Refer to Introduction of menu operations on

page 44.

2 Touch Auto EQ.

# You cannot use this function if auto TA and

EQ have not been carried out.

3 Touch d to turn the auto-equalizer on.

# To turn the auto-equalizer off, touch c.

Auto TA and EQ (auto-time

alignment and auto-equalizing)

Auto-time alignment automatically adjusts the

time alignment according to the distance be-

tween the listening position and each speaker.

The auto-equalizer automatically measures

the car’s interior acoustic characteristics, and

then creates an auto-equalizer curve based on

that information.

WARNING

As a loud tone (noise) may be emitted from the

speakers when measuring the car’s interior

acoustic characteristics, never perform auto TA

or auto EQ while driving.

CAUTION

! Thoroughly check the conditions before per-

forming auto TA and EQ as the speakers may

be damaged if these functions are performed

when:

— The speakers are incorrectly connected.

(For example, when a rear speaker is con-

nected as a subwoofer output.)

— A speaker is connected to a power amp de-

livering output higher than the speaker’s

maximum input power capability.

Section

Menu operations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-P4300DVD Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-P4300DVD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info