Bedienungsanleitung Pioneer AVH-P4300DVD (Seite 66 von 96) (Englisch)

454802

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

1 Display the system menu.

Refer to Introduction of menu operations on

page 44.

2 Touch Video Signal Setting on the func-

tion menu.

Video Signal Setting items are displayed.

! AV – Adjusts the AV video signal

! AUX – Adjusts the AUX video signal

! Camera – Adjusts the rear view camera

video signal

! TV – Adjusts the TV video signal

(AVH-P4300DVD only)

3 Touch c or d to select the desired

video signal appears.

Auto—PAL—NTSC—PAL-M—PAL-N—

SECAM

Selecting the area group

(Function of AVH-P4300DVD)

1 Select the TV source.

Refer to Basic operations on page 9.

2 Display the system menu.

Refer to Introduction of menu operations on

page 44.

3 Touch TV Country Group on the func-

tion menu.

4 Touch c or d until the desired area

group appears.

Country1 (CCIR channel)—Country2 (Italy

channel)—Country3 (U.K. channel)—

Country4 (OIRT channel)

Auto EQ (auto-equalizing)

The auto-equalizer automatically measures

the car’s interior acoustic characteristics, and

then creates an auto-equalizer curve based on

that information.

WARNING

As a loud tone (noise) may be emitted from the

speakers when measuring the car's interior

acoustic characteristics, never perform auto TA

or auto EQ while driving.

CAUTION

! Thoroughly check the conditions before per-

forming auto EQ as the speakers may be da-

maged if these functions are performed when:

— The speakers are incorrectly connected.

(For example, when a rear speaker is con-

nected as a subwoofer output.)

— A speaker is connected to a power amp de-

livering output higher than the speaker’s

maximum input power capability.

! If the microphone is placed in an unsuitable

position the measurement tone may become

loud and measurement may take a long time,

resulting in battery drainage. Be sure to place

the microphone in the specified location.

Before operating the auto EQ function

! Carry out auto EQ in as quiet a place as

possible, with the car engine and air condi-

tioning switched off. Also cut power to car

phones or portable telephones in the car, or

remove them from the car before carrying

out auto EQ. Sounds other than the mea-

surement tone (surrounding sounds, en-

gine sound, telephones ringing etc.) may

prevent correct measurement of the car in-

terior acoustic characteristics.

! Be sure to carry out auto EQ using the op-

tional microphone. Using another micro-

phone may prevent measurement, or result

in incorrect measurement of the car inter-

ior acoustic characteristics.

! In order to perform auto EQ, the front

speaker must be connected.

! When this unit is connected to a power

amp with input level control, auto EQ may

not be possible if the power amp’s input

level is set below the standard level.

Section

Menu operations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-P4300DVD Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-P4300DVD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info