Bedienungsanleitung Pioneer AVH-P5000DVD (Seite 72 von 98) (Englisch)

454824

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

6 Touch b to select DIMENSION and then

touch c or d to adjust front/surround

speaker balance.

Each time you touch c or d it moves the

sound towards the front or the surrounds.

+3 to –3 is displayed as the front/surround

speaker balance moves from front to sur-

rounds.

7 Touch b to select CENTER WIDTH and

then touch c or d to adjust the center

image.

Each time you touch c or d it gradually

spreads the center channel sound into the

front left and right speakers over a range 0 to

3 is the default and it’s recommended for

most recordings. 0 places all center sound in

the center speaker. 7 places all center sound

equally in the left/right speakers.

Setting the speaker setting

You need to make with/without (or yes/no) and

size (bass reproducing capacity) selection/ad-

justments depending on the installed speak-

ers. The size needs to be set to LARGE (large)

if the speaker is capable of reproducing

sounds of about 100 Hz or below. Otherwise

select SMALL (small).

! Low frequency range is not output if the

subwoofer is set to OFF and the front and

rear speakers set to SMALL or OFF.

! It is imperative that non-installed speakers

be set to OFF.

! Set the front or rear speaker to LARGE if

the speaker is capable of reproducing bass

content, or if no subwoofer is installed.

1 Touch NEXT on the DSP function menu.

2 Touch SPEAKER SETTING.

3 Touch a or b to select the speaker to

be adjusted.

Each time you touch a or b selects the speak-

er in the following order:

FRONT (front speakers)—CENTER (center

speaker)—REAR (rear speakers)—

SUB WOOFER (subwoofer)—PHASE (subwoo-

fer setting)

# You can switch to PHASE only when the sub-

woofer has been set to ON.

4 Touch c or d to select the correct size

for the selected speaker.

Each time you touch c or d selects the size in

the following order:

OFF (off)—SMALL (small)—LARGE (large)

# You cannot select OFF, when FRONT (front

speakers) have been selected.

# You can select ON or OFF, when

SUB WOOFER (subwoofer) has been selected.

# You can switch REVERSE (reverse phase) or

NORMAL (normal phase), when PHASE (subwoo-

fer setting) has been selected.

Correcting the subwoofer’s phase

If trying to boost the bass output of the sub-

woofer doesn’t do much or rather makes you

feel that the bass gets more murky, this may

indicate that the subwoofer’s output and bass

content you hear over other speakers cancel

each other out. To remove this problem, try

changing the phase setting for the subwoofer.

1 Touch NEXT on the DSP function menu.

2 Touch SPEAKER SETTING.

3 Touch a or b to select SUB WOOFER

(subwoofer).

Each time you touch a or b selects the speak-

er in the following order:

FRONT (front speakers)—CENTER (center

speaker)—REAR (rear speakers)—

SUB WOOFER (subwoofer)—PHASE (subwoo-

fer setting)

4 Touch d to turn subwoofer output on.

# To turn subwoofer output off, touch c.

5 Touch b and then touch c or d to se-

lect the phase of subwoofer output.

Touch d to select normal phase and

NORMAL appears in the display. Touch c to

select reverse phase and REVERSE appears in

the display.

Available accessori es

Section

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-P5000DVD Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-P5000DVD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info