Bedienungsanleitung Pioneer AVH-X2800BT (Seite 18 von 57) (Englisch)

649371

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

By keeping touching and holding or , you can perform

non stop seek tuning. Touch again to cancel.

The band (MW or LW) indicated on the band touch panel key

automatically switches according to the range of frequency

you are currently tuned in to.

Starting procedure

1 Display the “AV source selection” screen.

2 Touch [Radio].

The “Radio” screen appears.

Storing the strongest broadcast

frequencies

The BSM (best stations memory) function automatically stores

the six strongest broadcast frequencies under the preset tuning

keys “1” to “6”.

Storing broadcast frequencies with BSM may replace those

you have already saved.

Previously stored broadcast frequencies may remain stored

if the number of frequencies stored has not reached the

limit.

1 Touch .

2 Touch to begin a search.

While the message is displayed, the six strongest broadcast

frequencies will be stored under the preset tuning keys in order

of their signal strength.

 If you touch [Cancel], the storage process is

cancelled.

Displaying the “Radio settings”

screen

1 Display the “System” setting screen.

2 Touch [AV Source Settings].

3 Touch [Radio settings].

Tuning into strong frequencies

p This setting is available only when “Radio” is selected as the

source.

Local seek tuning allows you to only tune into those radio sta-

tions with sufficiently strong signals.

1 Display the “Radio settings” screen.

 Refer to Displaying the “Radio settings” screen on page 18

2 Touch [Local].

3 Touch the item.

 Off (default):

Turns the seek tuning setting off.



Level1 to Level4:

Sets the level of sensitivity for FM to Level1 to Level4 (for

MW and LW to Level1 or Level2).

The FM “Level4” (MW and LW “Level2”) setting allows

reception of only stations with the strongest signals.

Setting the FM tuning step

You can switch the seek tuning step for the FM band.

The default setting is “100kHz”.

The tuning step remains at 50 kHz during manual tuning.

1 Turn the source off.

 Refer to Selecting a source on page 9

2 Display the “Radio settings” screen.

 Refer to Displaying the “Radio settings” screen on page 18

3 Touch [FM Step] to switch the step to “50kHz”

or “100kHz”.

Switching the sound quality of

the FM tuner

p This function is available only when you receive the FM band.

1 Display the “Radio settings” screen.

 Refer to Displaying the “Radio settings” screen on page 18

2 Touch [Tuner Sound] to select the item.

 Music (default):

Gives priority to the sound quality.



Talk:

Gives priority to noise prevention.



Standard:

Gives no effect.

Setting the alternative fre-

quency search

When the tuner cannot get a good reception, tunes to another

broadcast station that supports the same programme in the

current network.

The default setting is “On”.

1 Display the “Radio settings” screen.

 Refer to Displaying the “Radio settings” screen on page 18

2 Touch [Alternative FREQ] to switch “On” or

“Off”.

Setting the Auto PI search

When you switch to the broadcast station containing RDS data,

searches for the same PI (Programme Identification) code broad-

cast station from all frequency band automatically.

The default setting is “Off”.

1 Turn the source off.

 Refer to Selecting a source on page 9

2 Display the “Radio settings” screen.

 Refer to Displaying the “Radio settings” screen on page 18

3 Touch [Auto PI] to switch “On” or “Off”.

p Even if you set to “Off”, the PI search is automatically per-

formed when the tuner cannot get a good reception.

Limiting stations to regional

programming

You can switch whether the area code is checked during the

auto PI search.

The default setting is “On”.

1 Display the “Radio settings” screen.

 Refer to Displaying the “Radio settings” screen on page 18

2 Touch [Regional] to switch “On” or “Off”.

Receiving trafc announce-

ments (TA)

p This function is available only when you receive the FM band.

< CRB4721-B >

Radio

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-X2800BT Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-X2800BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info