Bedienungsanleitung Pioneer AVH-X2800BT (Seite 35 von 57) (Englisch)

649371

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

Displaying the “System” set-

ting screen

1 Press .

2 Touch , and then .

The “System” setting screen appears.

Setting Bluetooth audio source

activation

The default setting is “On”.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [AV Source Settings].

3 Touch [Bluetooth Audio] to switch “On” or

“Off”.

Setting Spotify source

activation

The default setting is “On”.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [AV Source Settings].

3 Touch [Spotify] to switch “On” or “Off”.

Setting the ever scroll

When “Ever Scroll” is set to “On”, the recorded text information

scrolls continuously in the display while the vehicle is stopped.

The default setting is “Off”.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Ever Scroll] to switch “On” or “Off”.

Setting the beep tone

The default setting is “On”.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Beep Tone] to switch “On” or “Off”.

Setting the auto audio mix

function

You can select whether or not to activate the auto audio mix

function. If the auto audio mix function is activated, this prod-

uct automatically switches between mixing or not mixing the

AV source sound and the sound output from your iPhone or

smartphone according to the mixing property, such as that of the

mixed sound or solo sound of the foreground application on your

iPhone or smartphone.

The default setting is “On”.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Auto Mix] to switch “On” or “Off”.

Setting AppRadioMode Sound

You can set where the sound for AppRadioMode is output when

it is used with an Android device.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Input/Output settings].

3 Touch [AppRadioMode Sound].

4 Touch the following settings.

 AVH (default):

The sound is output from the speakers of this unit.



Smartphone

The sound is output from the speakers of the Android device.

With an iPhone, the sound is always output from the speak-

ers of this unit.

Setting the rear view camera

A separately sold rear view camera (e.g. ND-BC8) is required

for utilising the rear view camera function. (For details, consult

your dealer.)

Rear view camera

This product features a function that automatically switches to

the full-screen image of the rear view camera installed on your

vehicle, when the gearstick is in the REVERSE (R) position.

Camera View mode also allows you to check what is behind you

while driving.

Camera for Camera View mode

Camera View can be displayed at all times. Please note that

with this setting, the camera image is not resized to fit, and that

a portion of what is seen by the camera is not viewable.

To display the camera image, touch [Camera View] on the “AV

source selection” screen.



Refer to Source on the AV source selection screen on page

To set the rear view camera as the camera for Camera View

mode, set “Back Camera Input” to “On”.



Refer to Setting rear view camera activation on page 35

When using the 2nd camera, set “AV Input” to “Camera”.

(AVH-X5800DAB)(AVH-X3800DAB)



Refer to Starting procedure (for camera) on page 33

When the camera view of both the rear view camera and 2nd

camera are available, the key to switch the display appears.

Touch this key to switch the display between the rear view

image and 2nd camera image.

CAUTION

Pioneer recommends the use of a camera which outputs

mirror reversed images, otherwise the screen image may

appear reversed.

Immediately verify whether the display changes to a

rear view camera image when the gearstick is moved to

REVERSE (R) from another position.

When the screen changes to full-screen rear view camera

image during normal driving, switch to the opposite setting

in “Camera Polarity”.

If you touch while the camera image is displayed, the

displayed image will turn off temporarily.

Setting rear view camera activation

The default setting is “Off”.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Camera settings].

3 Touch [Back Camera Input] to switch “On” or

“Off”.

System settings

< CRB4721-B >

System settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-X2800BT Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-X2800BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info