Bedienungsanleitung Pioneer AVH-X2800BT (Seite 47 von 57) (Englisch)

649371

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

Troubleshooting

If you have problems operating this product, refer to this section.

The most common problems are listed below, along with likely

causes and solutions. If a solution to your problem cannot

be found here, contact your dealer or the nearest authorised

Pioneer service facility.

Common problems

A black screen is displayed, and operation is not possible

using the touch panel keys.



“Power OFF” mode is on.

— Press any button on this product to release the mode.

Problems with the AV screen

CD or DVD playback is not possible.



The disc is inserted upside down.

— Insert the disc with the label upward.

 The disc is dirty.

— Clean the disc.

 The disc is cracked or otherwise damaged.

— Insert a normal, round disc.

 The files on the disc are in an irregular file format.

— Check the file format.

 The disc format cannot be played back.

— Replace the disc.

 The loaded disc is a type this product cannot play.

— Check what type of disc it is.

The screen is covered by a caution message and the video

cannot be shown.



The handbrake lead is not connected or applied.

— Connect the handbrake lead correctly, and apply the

handbrake.



The handbrake interlock is activated.

— Park your vehicle in a safe place and apply the handbrake.

No video output from the connected equipment.



The “AV Input” or “AUX Input” setting is incorrect.

— Correct the settings.

The audio or video skips.



This product is not firmly secured.

— Secure this product firmly.

No sounds are produced. The volume level will not rise.



Cables are not connected correctly.

— Connect the cables correctly.

 The system is performing still, slow motion, or frame-by-

frame playback with DVD-Video.

— There is no sound during still, slow motion, or frame-by-

frame playback with DVD-Video.



The system is paused or performing, fast reverse or forwards

during the disc playback.

— For the media other than music CD (CD-DA), there is no

sound on fast reverse or forwards.

The icon  is displayed, and operation is impossible.



The operation is not compatible with the video configuration.

— This operation is not possible. (For example, the DVD

playing does not feature that angle, audio system, subtitle

language, etc.)

Random playback in Music Browse mode is released in the

USB storage device.



Random playback in Music Browse mode is cancelled after

the ignition switch is turned off (ACC off).

— Switch to Music Browse mode again and turn on random

playback.

The picture stops (pauses) and this product cannot be

operated.



The reading of data is impossible during disc playback.

— Stop playback once, then restart.

The picture is stretched, with an incorrect aspect ratio.



The aspect setting is incorrect for the display.

— Select the appropriate setting for that image.

A parental lock message is displayed and DVD playback

is not possible.



The parental lock is on.

— Turn the parental lock off or change the level.

The parental lock for DVD playback cannot be cancelled.



The code number is incorrect.

— Input the correct code number.

Playback is not with the audio language and subtitle

language settings selected in “DVD/DivX Setup”.



The DVD playing does not feature dialogue or subtitles in the

language selected in “DVD/DivX Setup”.

— Switching to a selected language is not possible if the

language selected in “DVD/DivX Setup” is not recorded

on the disc.

The picture is extremely unclear/distorted and dark during

playback.



The disc features a signal to prohibit copying. (Some discs

may have this.)

— Since this product is compatible with the copy guard

analogue copy protect system, the picture may suffer from

horizontal stripes or other imperfections when a disc with

that kind of protection signal is viewed on some displays.

This is not a malfunction.

iPod cannot be operated.



The iPod is frozen.

— Reconnect the iPod with the USB interface cable for iPod /

iPhone.

— Update the iPod software version.

 An error has occurred.

— Reconnect the iPod with the USB interface cable for iPod /

iPhone.

— Park your vehicle in a safe place, and turn off the engine.

Turn the ignition key back to off (ACC OFF). Then restart

the engine, and turn the power to this product back on.

— Update the iPod software version.

 Cables are not connected correctly.

— Connect the cables correctly.

Sound from the iPod cannot be heard.



The audio output direction may switch automatically when

the Bluetooth and USB connections are used at the same

time.

— Use the iPod to change the audio output direction.

Problems with the phone screen

Dialling is impossible because the touch panel keys for

dialling are inactive.



Your phone is out of range for service.

— Retry after re-entering the range for service.

 The connection between the mobile phone and this product

cannot be established now.

— Perform the connection process.

 Of the two mobile phones connected to this product at the

same time, if the first phone is dialling, ringing or a call is

in progress, dialling cannot be performed on the second

phone.

— When the operation on the first of the two mobile phones

is completed, use the switch devices key to switch to the

second phone and then dial.

Appendix

< CRB4721-B >

Appendix

Pioneer AVH-X2800BT Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-X2800BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info