Bedienungsanleitung Pioneer AVH-X3600DAB (Seite 73 von 100) (Englisch)

649366

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Bluetooth connection

menu operations

(Function of AVH-X5600BT/AVH-X3600DAB/

AVH-X2600BT)

Note

If you are using a cellular phone that can be con-

nected via Bluetooth wireless technology, we re-

commend that you use your phone to search for

this unit and establish a connection between it

and your phone. The PIN code is set to 0000 as

default. The product name for this unit will dis-

play on your phone as the device name. For de-

tails, refer to Entering PIN code for Bluetooth

wireless connection on page 74. For further details

concerning the procedures for establishing

Bluetooth wireless connections, refer to the in-

struction manual for the phone.

Pairing from this unit

1 Press the home button to switch to the

home display.

2 Touch the Bluetooth key to open the

Bluetooth connection menu.

3 Touch Connection to select a device.

4 Start to search.

Starting to search.

While searching, is displayed and when

available devices are found, the device names

or Bluetooth device addresses (if names can-

not be obtained) are displayed.

# If you want to switch between the device

names and Bluetooth device addresses, touch

the icon.

Switching between the device

names and Bluetooth device ad-

dresses.

# To cancel searching, touch Stop.

# If three devices are already paired,

Memory Full is displayed and pairing cannot be

performed. In such cases, delete a paired device

first. Refer to page 73.

# If no device can be found, Not Found is dis-

played. In such cases, check the status of the

Bluetooth device and search again.

5 Touch a device name to select the de-

vice you want to connect to.

While connecting, Pairing is displayed. If the

connection is established, Paired is displayed.

# If your device support SSP (Secure Simple

Pairing), six-digit number appears on the display

of this unit. Once the connection is established,

this number disappears.

# If the connection fails, Error is displayed. In

such cases, try again from the beginning.

# The PIN code is set to 0000 as the default, but

can be changed. Refer to Entering PIN code for

Bluetooth wireless connection on page 74.

# Once the connection is established, the de-

vice name is displayed.

Touch the device name to disconnect.

# If you want to delete a paired Bluetooth tele-

phone, display Delete OK?. Touch Yes to delete

the device.

Deleting a paired device.

# Never turn the unit off while the paired

Bluetooth telephone is being deleted.

Connecting to a Bluetooth

device automatically

If this function is set to on, a connection be-

tween your Bluetooth device and this unit will

take place automatically as soon as the two

devices are less than a few meters apart.

Initially, this function is set to on.

1 Press the home button to switch to the

home display.

Section

Bluetooth connection menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-X3600DAB Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-X3600DAB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info