Bedienungsanleitung Pioneer AVH-X390BT (Seite 36 von 53) (Englisch)

649373

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

p This function is not available when adjusting the High

speaker.

Switching the rear speaker

output

p This function is available when “Standard Mode” is selected

as the speaker mode.

The default setting is “Rear”.

1 Turn the source off.

 Refer to Selecting a source on page 9

2 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 35

3 Touch [Rear Speaker Output].

4 Touch to switch “Rear” or “Subwoofer”.

Using BASS Boost

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 35

2 Touch [Bass Boost].

3 Touch to select the bass boost level from 0 to

+6.

Selecting the listening position

You can select a listening position that you want to make as the

centre of sound effects.

The default setting is “Off”.

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 35

2 Touch [Listening Position].

3 Touch the desired position to change the lis-

tening position.

The following items are available:

Off, Front-L, Front-R, Front, All.

p “All” is not available when “Network Mode” is selected as

the speaker mode.

Adjusting the speaker output

levels nely

Fine adjustments of the speaker output level can be made by

listening to audio output.

p This function is available when “Subwoofer” is set to “On”.

 Refer to Setting the subwoofer output on page 35

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 35

2 Touch [Speaker Level].

3 Touch

or to select the listening position

if necessary.

The following items are available:

Off, Front-L, Front-R, Front, All.

p The default setting is “Off”.

p “All” is not available when “Network Mode” is selected as

the speaker mode.

p If you change the listening position setting, the output

levels of all the speakers will change in conjunction with the

setting.

4 Touch or to adjust the speaker output

level.

p “–24” dB to “10” dB is displayed as the level to be corrected

is increased or decreased.

The following speakers are available:

Standard Mode: Front Left, Front Right, Rear Left, Rear Right,

Subwoofer

Network Mode: High Left, High Right, Mid Left, Mid Right,

Subwoofer

p To use this function, the vehicle’s acoustics must be meas-

ured in advance.

Adjusting the time alignment

By adjusting the distance from each speaker to the listening

position, time alignment is able to correct the time required for

sound to reach the listening position.

1 Measure the distance between the head of the

listener and each speaker unit.

2 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 35

3 Touch [Time Alignment].

4 Touch

or to select the listening position

if necessary.

The following items are available:

Off, Front-L, Front-R, Front, All.

p The default setting is “Off”.

p “All” is not available when “Network Mode” is selected as

the speaker mode.

p If you change the listening position setting, the output

levels of all the speakers will change in conjunction with the

setting.

5 Touch or to input the distance between

the selected speaker and the listening position.

p You can input the value every 2.5 cm (between 0 and 350

cm).

The following speakers are available:

Standard Mode: Front Left, Front Right, Rear Left, Rear Right,

Subwoofer

Network Mode: High Left, High Right, Mid Left, Mid Right,

Subwoofer

p This function is available only when the listening position

setting is set to “Front-L” or “Front-R”.

p To use this function, the vehicle’s acoustics must be meas-

ured in advance.

 If you touch [TA On], the time alignment is turned

off mandatorily.

Switching the time alignment

preset

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 35

2 Touch [Time Alignment Preset].

3 Touch the item.

 Initial (default):

Sets to the initial setting value.

 ATA:

Reflects the result of “A-EQ&TA Measurement” to the

setting value.

 Off:

Resets all setting values to 0.

 Custom:

Sets to the value adjusted at “Time Alignment”.

p When you adjust the time alignment, the preset item will

switch automatically to “Custom”.

p “Custom” can be selected only when the listening position is

set to “Front-L” or “Front-R”.

< QRB3700-A >

Audio adjustments

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-X390BT Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-X390BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info