Bedienungsanleitung Pioneer AVH-X5700DAB (Seite 45 von 66) (Englisch)

649370

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

1 Stop the vehicle in a quiet place, close all the

doors, windows and sun roof, and then turn the

engine off.

If the engine is left running, engine noise may prevent correct

Auto EQ.

If driving restrictions are detected during measurement,

measurement is canceled.

2 Fix the microphone for acoustical measurement

(sold separately) in the center of the headrest

of the driver’s seat, facing forward.

The Auto EQ may differ depending on where you place the micro-

phone. If desired, place the microphone on the front passenger

seat and perform Auto EQ.

3 Disconnect the iPhone or smartphone device.

4 Turn on the ignition switch (ACC ON).

If the vehicle’s air conditioner or heater is turned on, turn it off.

5 Switch the AV source to “OFF”.

 Displaying the AV operation screen on page 9

6 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 42

7 Touch [A-EQ&TA Measurement].

The “A-EQ&TA Measurement” screen appears.

8 Connect the microphone for acoustical mea-

surement (sold separately) with this product.

Plug the microphone into the AUX input jack on this product.

Use an extension cable (sold separately) if the cord of the

Microphone (sold separately) is not long enough.

9 Touch [Front Left] or [Front Right] to select the

current listening position.

10 Touch [Start].

A 10-second countdown starts.

The Bluetooth connection is disconnected before the pro-

cess starts.

11 Exit the vehicle and keep the doors closed until

the countdown finishes.

When the countdown finishes, a measurement tone (noise)

is emitted from the speakers and the Auto EQ measurement

begins.

12 Wait until the measurement is completed.

When Auto EQ is completed, a message is displayed.

The measurement time varies depending on the type of

vehicle.

To stop the measurement, touch [Stop].

13 Store the microphone carefully in the glove

compartment or another safe place.

If the microphone is subjected to direct sunlight for an extended

period, high temperatures may cause distortion, color change

or malfunction.

Saving the sound settings

You can save to recall the following current sound settings:

fader, balance, speaker level, Graphic EQ, HPF/LPF, listening

position, crossover, time alignment.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 42

2 Touch [Save Settings].

3 Touch [OK].

All of the current sound settings are saved.

 When you touch [Cancel], return to the “Audio”

setting screen.

Loading the sound settings

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 42

2 Touch [Load Settings].

3 Touch the item you want to load.

The following items are available:

AEQ Setting,Sound Setting.

“AEQ Setting” is available only when you have already

performed Auto EQ measurement.



Adjusting the equalizer curve automatically (Auto EQ) on page

“Sound Setting” is available only when you have already

saved the sound settings.



Saving the sound settings on page 45

< CRB4947-A >

Audio adjustments

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-X5700DAB Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-X5700DAB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info