Bedienungsanleitung Pioneer AVH-X7700BT (Seite 40 von 62) (Englisch)

649375

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Displaying the “Audio” setting

screen

1 Press .

2 Touch , and then .

The “Audio” setting screen appears.

Using fader adjustment

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 40

2 Touch [Fader].

3 Touch or to adjust the front/rear speaker

balance.

p “Front25” to “Rear25” is displayed as the front/rear speaker

balance moves from the front to rear.

The default setting is “F/R 0”.

Set “Front” and “Rear” to “0” when using a dual speaker

system.

 You can also set the fader/balance by dragging

the point on the displayed table.

Using balance adjustment

p This function is available when “Standard Mode” is selected

as the speaker mode.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 40

2 Touch [Balance].

3 Touch or to adjust the left/right speaker

balance.

p “Left25” to “Right25” is displayed as the left/right speaker

balance moves from the left to right.

The default setting is “L/R 0”.

 You can also set the fader/balance by dragging

the point on the displayed table.

Switching sound muting/

attenuation

You can automatically mute or attenuate the AV source volume

and the iPhone application volume when the navigation outputs

the guidance voice.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 40

2 Touch [Mute Level].

3 Touch the item you want to set.

● ATT (default):

The volume becomes 20 dB lower than the current volume.

●

Mute:

The volume becomes 0.

●

Off:

The volume does not change.

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of

each source to prevent radical changes in volume when switch-

ing between sources.

Settings are based on the FM tuner volume level, which

remains unchanged.

This function is not available when the FM tuner is selected

as the AV source.

1 Compare the FM tuner volume level with the

level of the source you want to adjust.

2 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 40

3 Touch [Source Level Adjuster].

4 Touch or to adjust the source volume.

p If you directly touch the area where the cursor can be moved,

the SLA setting will be changed to the value of the touched

point.

“+4” to “–4” is displayed as the source volume is increased

or decreased.

The default setting is “0”.

Using the auto level control

This function corrects automatically the audio level difference

between the music files or the sources.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 40

2 Touch [Automatic Level Control].

3 Touch the item.

● Off (default):

Turns the auto level control setting off.

●

Mode1:

Corrects a little the audio level difference between the music

files or the sources (for the narrow dynamic range audio

signal).

●

Mode2:

Corrects widely the audio level difference between the

music files or the sources (for the wide dynamic range audio

signal).

Adjusting loudness

This function compensates for deficiencies in the low-frequency

and high-frequency ranges at low volume.

This function is not available while you make or receive a call

using the hands-free function.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 40

2 Touch [Loudness].

3 Touch the item.

The following items are available:

Off (default), Low, Mid, High.

Using the subwoofer output

This product is equipped with a subwoofer output mechanism,

which can be turned on or off.

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 40

2 Touch [Subwoofer] to switch “On” (default) or

“Off”.

Adjusting the cutoff frequency

value

You can adjust the cutoff frequency value of each speaker.

The following speakers can be adjusted:

Standard Mode: Front, Rear, Subwoofer.

Network Mode: High, Mid, Subwoofer.

“Subwoofer” is available only when “Subwoofer” is “On”.



Using the subwoofer output on page 40

1 Display the “Audio” setting screen.

 Displaying the “Audio” setting screen on page 40

2 Touch [Crossover] or [Subwoofer Settings].

3 Touch or to switch the speaker you want

to adjust.

< CRB4933-A >

Audio adjustments

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-X7700BT Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-X7700BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info