Bedienungsanleitung Pioneer AVH-X8700BT (Seite 27 von 164) (Englisch)

576508

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

6 Wait until your Bluetooth device ap-

pears in the list.

p If you cannot find the Bluetooth device that

you want to connect, check that the device

is waiting for a Bluetooth wireless technol-

ogy connection.

7 Touch the name of the Bluetooth device

you want to register.

While connecting, “Pairing… Please wait.” is

displayed. If the connection is established,

“Paired.” is displayed.

p If your device supports SSP (Secure Simple

Pairing), a six-digit number appears on the

display of this product. Touch [Yes] to pair-

ing the device.

p If the connection fails, “Error” is displayed.

In such cases, try again from the begin-

ning.

p The PIN code is set to “0000” as the default,

but can be changed.

= For details, refer to Entering the PIN code

for Bluetooth wireless connection on

page 29.

p Once the connection is established, the de-

vice name is displayed. Touch the device

name to disconnect.

After the device is successfully registered, a

Bluetooth connection is established from the

system.

The profile icons displayed on the registered

device list screen light up as follows.

Lights up when your mobile device

is successfully connected with the

HFP (Hands-Free Profile).

Lights up when your audio device

is successfully connected with the

A2DP (Advanced Audio Distribu-

tion Profile)/AVRCP (Audio/Video

Remote Control Profile).

Lights up when the Bluetooth con-

nection is established with the

SPP (Serial Port Profile).

p After pairing, the phone book registered in

the device may be automatically trans-

mitted to this product.

# If you touch the following key, you can switch

the display between the device names and

Bluetooth device addresses.

Switches between the device

names and Bluetooth device ad-

dresses.

Pairing from your Bluetooth

devices

You can register a Bluetooth device by setting

this product to standby mode and requesting

a connection from the Bluetooth device.

p Before registration, make sure that “Visibi-

lity” in the “Bluetooth” menu is set to

“On”.

= For details, refer to Switching visibility on

page 29.

1 Activate the Bluetooth wireless tech-

nology on your devices.

p For some Bluetooth devices, no specific ac-

tion is necessary to activate Bluetooth wire-

less technology. For details, refer to the

instruction manual of your devices.

2 Use the Bluetooth setting in the device

to pair this product with the device.

p If a PIN code input is required, enter a PIN

code. (The default PIN code is “0000”.)

When the device is successfully registered,

the connection settings are made from the

device.

p If registration fails, repeat the procedure

from the beginning.

Connecting to a Bluetooth

device automatically

If this function is set to on, a connection be-

tween your Bluetooth device and this product

will take place automatically as soon as the

two devices are less than a few metres apart.

Initially, this function is set to on.

Engb

Chapter

Registering and connecting a Bluetooth device

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-X8700BT Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-X8700BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info